transient conjugate heat transfer with dynamic mesh

gwen520 · April 15, 2015, 22:43

hello,everyone!
I am now modeling a tansient conjugate heat transfer problem of reciprocating compressor.
in my case, I have to make a interface betewwn two sides: one side is the cylinder bore, the other side is the boundries of piston and fluid zone.
So my interface is one to muiti-boundries type as well as
one solid interface to the combination of fluid and solid interces type, I wonder wether Fluent or CFX can solve such issue.
can you give some advice,thanks in advace!

gwen520 · April 15, 2015, 22:51

attachments show my model

April 15, 2015, 22:43	transient conjugate heat transfer with dynamic mesh	#1
gwen520 New Member Gwen Yang Join Date: Sep 2014 Posts: 13 Rep Power: 12	hello,everyone! I am now modeling a tansient conjugate heat transfer problem of reciprocating compressor. in my case, I have to make a interface betewwn two sides: one side is the cylinder bore, the other side is the boundries of piston and fluid zone. So my interface is one to muiti-boundries type as well as one solid interface to the combination of fluid and solid interces type, I wonder wether Fluent or CFX can solve such issue. can you give some advice,thanks in advace!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Moving mesh	Niklas Wikstrom (Wikstrom)	OpenFOAM Running, Solving & CFD	122	June 15, 2014 07:20
Question about conjugate heat transfer mesh for laminar model	Anna Tian	Main CFD Forum	11	May 7, 2013 13:13
Inverse and Transient Heat Transfer Problem on commercial software: is it possible?	rogbrito	CFX	1	January 29, 2012 18:48
fluent add additional zones for the mesh file	SSL	FLUENT	2	January 26, 2008 12:55
transient conjugate heat transfer problem	scott	Siemens	2	March 12, 2007 15:10