Ansys15 editor problems onto 'not supportet' OS

kapitaenhaddock · December 10, 2014, 04:01

Good Morning Community,

we are trying to run a local installed Ansys15 on a OpenSuSE 13.1 but we stumble into several problems. We know, the OS is 'not supported' by ANSYS but we have no problems with the former versions onto older OpenSuSE versions.

The error named 'unable to start mechanical editor'.
The console shows 'A fatal error has occurred within AnsysWBU.exe and it must be closed...' The same error message does also occurred, when we are going to start the geometry editor.

According to other threads in this forum we have tried to deactivate the firewall and (re)installed the nvidia graphic driver (inc. reboot) and have preloaded the mechanical and geometry editor in the options.

Do you have any other ideas how we can get rid of this problem?

Thanks in advance.

Best regards,
Christian

huey1080 · December 12, 2014, 11:11

Hi Christian,

On unsupported OS, usually you need to find the equivalent needed packages for your OS. Since CentOs is based on RedHat, you can first try to install lsb and after that all the packages related to MesaGL (MesaGL, MesaGLw, and all the devel packages as well).
Good luck

vigges · May 30, 2015, 04:16

Hello everyone,

just in case the problem still persists:
http://www.padtinc.com/blog/the-focu...and-workaround
It's written for RHEL 6.6 (which is not supported despite being an official distro) but it works for SuSE 13.1 like a charm.

Best regards,
Victor

December 10, 2014, 04:01	Ansys15 editor problems onto 'not supportet' OS	#1
kapitaenhaddock New Member Join Date: Dec 2014 Posts: 1 Rep Power: 0	Good Morning Community, we are trying to run a local installed Ansys15 on a OpenSuSE 13.1 but we stumble into several problems. We know, the OS is 'not supported' by ANSYS but we have no problems with the former versions onto older OpenSuSE versions. The error named 'unable to start mechanical editor'. The console shows 'A fatal error has occurred within AnsysWBU.exe and it must be closed...' The same error message does also occurred, when we are going to start the geometry editor. According to other threads in this forum we have tried to deactivate the firewall and (re)installed the nvidia graphic driver (inc. reboot) and have preloaded the mechanical and geometry editor in the options. Do you have any other ideas how we can get rid of this problem? Thanks in advance. Best regards, Christian

December 12, 2014, 11:11		#2
huey1080 New Member Quentin Lux Join Date: Feb 2012 Location: Quebec Posts: 23 Rep Power: 14	Hi Christian, On unsupported OS, usually you need to find the equivalent needed packages for your OS. Since CentOs is based on RedHat, you can first try to install lsb and after that all the packages related to MesaGL (MesaGL, MesaGLw, and all the devel packages as well). Good luck

May 30, 2015, 04:16		#3
vigges Member Join Date: Oct 2011 Posts: 36 Rep Power: 15	Hello everyone, just in case the problem still persists: http://www.padtinc.com/blog/the-focu...and-workaround It's written for RHEL 6.6 (which is not supported despite being an official distro) but it works for SuSE 13.1 like a charm. Best regards, Victor