2D Analysis in WB 14.5 Without Design Modeller

Saladsamurai · October 23, 2013, 14:52

Hello all!

I am working on procuring DM, but for now, the company I am at does not have it. I have a 3D model created in NX (Unigraphics). I am trying to figure out how to import 2D geometry (cross-section) into Workbench (or import the 3D and convert to 2D in WB w/out using DM).

This is what I have tried so far:

1) I have tried saving the section curves in NX first and then change my Analysis type (in WB) to 2D and toggled off "Solid bodies" and "Surface bodies" and toggled on "Line Bodies." I receive an error when I import and try to launch Mechanical Application."Plugin Error: No Valid Bodies Found."

2) Import 3D geometry with Analysis type set to 2D-->Same error.

Any thoughts on how I can accomplish this? Thanks.

PranjalNewton · September 28, 2015, 12:58

Did you find a solution? I've spent days with this. I see people doing it in tutorials but can't do it myself! Please help.

Thanks.

PranjalNewton · September 28, 2015, 13:13

Got it!
Make sure the 2D surface is on X-Y plane!

October 23, 2013, 14:52	2D Analysis in WB 14.5 Without Design Modeller	#1
Saladsamurai New Member Join Date: Feb 2013 Posts: 5 Rep Power: 13	Hello all! I am working on procuring DM, but for now, the company I am at does not have it. I have a 3D model created in NX (Unigraphics). I am trying to figure out how to import 2D geometry (cross-section) into Workbench (or import the 3D and convert to 2D in WB w/out using DM). This is what I have tried so far: 1) I have tried saving the section curves in NX first and then change my Analysis type (in WB) to 2D and toggled off "Solid bodies" and "Surface bodies" and toggled on "Line Bodies." I receive an error when I import and try to launch Mechanical Application."Plugin Error: No Valid Bodies Found." 2) Import 3D geometry with Analysis type set to 2D-->Same error. Any thoughts on how I can accomplish this? Thanks.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Design modeller	SHIKHA BHUYAN	ANSYS	2	March 10, 2017 15:48
Ansys 14.5 CFD to structural analysis	VJ0085	ANSYS	0	October 16, 2013 13:16
[Other] Import autocad into Design modeller	lcea	ANSYS Meshing & Geometry	1	December 1, 2010 14:15
Import autocad into Design modeller	lcea	CFX	0	November 30, 2010 05:13
Info: Short Course On Thermal Design of Electronic Equipment	Arnold Free	Main CFD Forum	0	August 10, 1999 11:18

September 28, 2015, 12:58		#2
PranjalNewton Member Pranjal Singh Join Date: Sep 2015 Posts: 34 Rep Power: 11	Did you find a solution? I've spent days with this. I see people doing it in tutorials but can't do it myself! Please help. Thanks.

September 28, 2015, 13:13		#3
PranjalNewton Member Pranjal Singh Join Date: Sep 2015 Posts: 34 Rep Power: 11	Got it! Make sure the 2D surface is on X-Y plane!