interior in Ansys Workbench

maziar.alasvand@gmail.com · June 19, 2013, 14:55

Hi every one

I have a simple tube with 1m lenght(1 zone). in Ansysworkbench I slice it with a surface in center(two zone). Ansys create connections automatically. but in fluent will disapear interior B.C for choosing central surface. I tried different ways but I could not solve it for six month. this problem is a interior problem or a interface problem.
Your help is greatly appreciated.
Thanks.

maziar.alasvand@gmail.com · June 19, 2013, 21:33

I found the solution myself.
first check connection in meshing that be correct between the face of zones.
second for each face of two zones and zones create name selection. this work is useful in fluent for easy creation of interface. as you create interface from two face, interior B.C will be created. but for getting contour you should choose interface.

June 19, 2013, 14:55	interior in Ansys Workbench	#1
maziar.alasvand@gmail.com New Member maziar Join Date: Jun 2013 Posts: 8 Rep Power: 13	Hi every one I have a simple tube with 1m lenght(1 zone). in Ansysworkbench I slice it with a surface in center(two zone). Ansys create connections automatically. but in fluent will disapear interior B.C for choosing central surface. I tried different ways but I could not solve it for six month. this problem is a interior problem or a interface problem. Your help is greatly appreciated. Thanks.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
ANSYS Workbench on "Uncertified" Linux Distros	hsr	CFX	289	April 20, 2023 10:23
Pro/E to ANSYS Parameterization Guide	Trues	ANSYS	4	April 18, 2018 06:52
Macro command combatibility ANSYS workbench	Tassos	CFX	6	January 13, 2014 05:19
Can't find Ansys workbench in CentOS	idil	ANSYS	1	October 11, 2012 09:44
Ansys workbench problem	Jonny6001	ANSYS	2	September 30, 2010 13:59

June 19, 2013, 21:33		#2
maziar.alasvand@gmail.com New Member maziar Join Date: Jun 2013 Posts: 8 Rep Power: 13	I found the solution myself. first check connection in meshing that be correct between the face of zones. second for each face of two zones and zones create name selection. this work is useful in fluent for easy creation of interface. as you create interface from two face, interior B.C will be created. but for getting contour you should choose interface.