[hadrien51]

Hello Everybody

I am trying to mesh a simple surface with blocking 2D planar, but one of the edge don't want to be associated to a curve.
The problem is quite trivial but I can't succeed to do it.
If someone can help me.
Thank you

I send some pictures !

[galap]

One edge is not associated correctly. Don't you notice the green arrow to one point instead to curve?

[hadrien51]

yes of course I notice !
this is the title of the post
the problem is that I don't understand why Ansys don't want associate the edge to the curve. Perhaps because one of the curve is parametric ? I don't know .
Is someone understand why.
But thank you Galad

[Far]

attach tin and blk

[hadrien51]

thank Far
http://dl.dropbox.com/u/3423073/far.gz

[hadrien51]

I hope that you can download the file !
if not send me your email and I invite you to download the file with dropbox
thank you and sorry

[Far]

use this blk file (just change extension to .blk from .txt). It is the limitation of straight edge association to high curvature curve. Need to be split into more edges.

[hadrien51]

Thank you a lot Far !

[Far]

Solved?????????

[hadrien51]

Yes solved ! thank you
yesterday I cut the 2D block in 3 three parts but in 4 parts it is better !
but It is strange that ansys is not capable to associate well this edge with this curve without splitting the edge.
In any case thank you

[hadrien51]

To follow with this problem, I trying to mesh a surface boat with the bottom structured and the rest unstructured. This is the reason of this post.
I want to do the same mesh than the picture but with the boat, mixing structured with unstructured. I use in volume mesh the octree method and existing mesh part
I put the tin and the blk in dropbox.

http://dl.dropbox.com/u/3423073/casco.blk
http://dl.dropbox.com/u/3423073/casco.tin

I am not capable to mesh it ! I do it for the appendices but for the boat , this is not working.
Is you have a solution Far, you will be great !
Thank you in advance