[romekr]

This is my first post here, so hello everyone

I have to do some calculations on combustion chamber, with geometry made in ICEM, but I'm not familiar with this software. I need to export mesh in fluent format.

I have tried:
1. Open given project in ANSYS ICEM CFD 11.0
2. Output -> Solver Setup -> Output Solver -> Fluent_V6
There is also Common Structural Solver to choose with options: NASTRAN; ANSYS; LS-Dyna; Abaqus; AUTODYN;
I don’t know which one to choose, so it is NASTRAN.
3. -> Write Input
and I get something like this:

http://vernetest.vipserv.org/export.png

.msh file is successfully created.
But problems start when I want to use obtained .msh.

Imported to Fluent 6.3.26 generates output:

       Welcome to Fluent 6.3.26
   
       Copyright 2006 Fluent Inc.
       All Rights Reserved
   
  Loading "C:\Fluent.Inc\fluent6.3.26\lib\fl_s1119.dmp"
  Done.
   
> Reading "D:\fluent.msh"...
   1426938 nodes.
   7151783 tetrahedral cells, zone 43.
  13886587 triangular interior faces, zone 44.
    140675 triangular wall faces, zone 45.
    141380 triangular wall faces, zone 46.
     65482 triangular wall faces, zone 47.
     74567 triangular wall faces, zone 48.
     52048 triangular wall faces, zone 49.
     52408 triangular wall faces, zone 50.
     17169 triangular wall faces, zone 51.
     24898 triangular wall faces, zone 52.
      1292 triangular wall faces, zone 53.
      1074 triangular wall faces, zone 54.
     15806 triangular wall faces, zone 55.
      2918 triangular wall faces, zone 56.
      4600 triangular wall faces, zone 57.
      4450 triangular wall faces, zone 58.
     12327 triangular wall faces, zone 59.
     24935 triangular wall faces, zone 60.
      5113 triangular wall faces, zone 61.
      1410 triangular wall faces, zone 62.
     16988 triangular wall faces, zone 63.
       702 triangular wall faces, zone 64.
     17474 triangular wall faces, zone 65.
     28855 triangular wall faces, zone 66.
     10531 triangular wall faces, zone 67.
      2720 triangular wall faces, zone 68.
      4038 triangular wall faces, zone 69.
       352 triangular wall faces, zone 70.
      3042 triangular wall faces, zone 71.
      3004 triangular wall faces, zone 72.
      2191 triangular wall faces, zone 73.
      4202 triangular wall faces, zone 74.
      1570 triangular wall faces, zone 75.
     76578 triangular wall faces, zone 76.
      7832 triangular wall faces, zone 77.
      4906 triangular wall faces, zone 78.
      6421 triangular wall faces, zone 79.
   
  Building...
       grid,
  Warning: ST_Malloc: out of memory.malloc_storage: unable to malloc cell1, size 55546348, t 44, myid 1000000.
   
  Error: 
  FLUENT received fatal signal (ACCESS_VIOLATION)
  1. Note exact events leading to error.
  2. Save case/data under new name.
  3. Exit program and restart to continue.
  4. Report error to your distributor.
  Error Object: ()

I also can’t import mesh into Gambit 2.4.6.

I try: File -> Import -> Mesh -> FLUENT 5/6 3D

And then I get Windows error, like this:
http://vernetest.vipserv.org/error.png

In Gambit window I have:
http://vernetest.vipserv.org/gambit_window.png

And in start up window:

Locating Exceed installation ...
  Launching Exceed 11 ...
  Starting C:\Fluent.Inc\gambit2.3.16\ntx86\gambit.exe -device open -id default_id3032 -new  ...
   
  []
  Gambit build SP2006032921.
  Warning: locale not supported by Xlib, locale set to C
  OPENGL_DEVICE_DRIVER not supported
                  Defaulting to X_DEVICE_DRIVER with standard visual.
   
  RAMPANT file to FIDAP7 file
  Error: Couldn't allocate element (2752512 currently allocated).
  Error: Couldn't allocate element (2785280 currently allocated).
  Error: Couldn't allocate element (2818048 currently allocated).
  ...
  ...
  ...
  Error: Couldn't allocate element (7045120 currently allocated).
  Error: Couldn't allocate element (7077888 currently allocated).
  Error: Couldn't allocate element (7110656 currently allocated).
  Error: Couldn't allocate element (7

As I said, Im not familiar with ICEM, so have no idea what may cause that problems. I would be very grateful for any help


Edit:

SOLVED!

Problem was caused by computer. Mesh imported in 4-core PC works correct.

[arjun3020]

I also come across this. just save your project by other name, and try.
if not solve then delete all the things and do repeat your project.