Hollow sphere

iside · July 25, 2011, 11:05

Hi All,
I am a new user, not familiar with the environment of Gmsh 2.5. I am working on my thesis which is basically the Left Atrium being represented as a HOLLOW SPHERE with five circular orifices with different dimension: four orifices on the top representing the four pulmonary veins and at the bottom the appendage.

Could ANYBODY instructed how to build such hollow sphere since i a new user

Best regards,
Cheers,
Nouhou

PSYMN · July 26, 2011, 11:06

Sorry, not sure what Gmesh 2.5 is? Perhaps you are on the wrong forum?

iside · July 26, 2011, 11:19

I am trying to build up a hollow sphere with four circular orifices on the top face and one at the bottom. It is my Master's thesis.
I need to build it and export unto Preview which is an open source software developed by
Biomedical Department of Utah University.

Cheers,

Nouhou

July 25, 2011, 11:05	Hollow sphere	#1
iside New Member Issoufou Join Date: Jun 2011 Posts: 2 Rep Power: 0	Hi All, I am a new user, not familiar with the environment of Gmsh 2.5. I am working on my thesis which is basically the Left Atrium being represented as a HOLLOW SPHERE with five circular orifices with different dimension: four orifices on the top representing the four pulmonary veins and at the bottom the appendage. Could ANYBODY instructed how to build such hollow sphere since i a new user Best regards, Cheers, Nouhou

July 26, 2011, 11:06		#2
PSYMN Senior Member Simon Pereira Join Date: Mar 2009 Location: Ann Arbor, MI Posts: 2,663 Blog Entries: 1 Rep Power: 47	Sorry, not sure what Gmesh 2.5 is? Perhaps you are on the wrong forum? __________________ ----------------------------------------- Please help guide development at ANSYS by filling in these surveys Public ANSYS ICEM CFD Users Survey This second one is more general (Gambit, TGrid and ANSYS Meshing users welcome)... CFD Online Users Survey

July 26, 2011, 11:19	Hollow sphere	#3
iside New Member Issoufou Join Date: Jun 2011 Posts: 2 Rep Power: 0	I am trying to build up a hollow sphere with four circular orifices on the top face and one at the bottom. It is my Master's thesis. I need to build it and export unto Preview which is an open source software developed by Biomedical Department of Utah University. Cheers, Nouhou

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[snappyHexMesh] Meshing a sphere with snappyHexMesh	Cyberholmes	OpenFOAM Meshing & Mesh Conversion	2	July 19, 2011 17:46
Coanda effect, condensation on sphere	technophobe	Main CFD Forum	4	February 17, 2010 11:04
[GAMBIT] Asymmetric boundary layer (3D) on surface of a half sphere	Jochen Halfmann	ANSYS Meshing & Geometry	0	September 22, 2009 15:16
CFX analysis of a sphere - drag too low	Rob Findlay	CFX	6	March 26, 2007 11:11
meshing F1 front wing	Steve	FLUENT	0	April 17, 2003 13:37