[ICEM] ICEM mesh to ADINA

Streamlet · April 12, 2011, 05:56

Hello all
I want to output a icem mesh to adina by the format of nastran. When I input the nastran file I don't know how to set the boundary conditions, because there are not any face information about in adina, If I need do some settings in icem ? Can anyone tell me the right process? Many thanks!
Yours Streamlet

PSYMN · April 13, 2011, 13:03

Parts in ICEM CFD typically come across as something you could hook a boco too.

I see that we can output to ADINA directly from ICEM CFD. I guess it has limited support, which usually indicates that users can setup the bocos in the solver...

If you are using the Nastran format to export from ICEM CFD, then you could set loads, constraints, etc. using those tabs. If those tabs are not already visible, make sure you have set the "settings => Product" to something with FEA and then restart ICEM CFD...

April 12, 2011, 05:56	ICEM mesh to ADINA	#1
Streamlet New Member Streamlet Join Date: Mar 2011 Posts: 11 Rep Power: 15	Hello all I want to output a icem mesh to adina by the format of nastran. When I input the nastran file I don't know how to set the boundary conditions, because there are not any face information about in adina, If I need do some settings in icem ? Can anyone tell me the right process? Many thanks! Yours Streamlet

April 13, 2011, 13:03		#2
PSYMN Senior Member Simon Pereira Join Date: Mar 2009 Location: Ann Arbor, MI Posts: 2,663 Blog Entries: 1 Rep Power: 47	Parts in ICEM CFD typically come across as something you could hook a boco too. I see that we can output to ADINA directly from ICEM CFD. I guess it has limited support, which usually indicates that users can setup the bocos in the solver... If you are using the Nastran format to export from ICEM CFD, then you could set loads, constraints, etc. using those tabs. If those tabs are not already visible, make sure you have set the "settings => Product" to something with FEA and then restart ICEM CFD... __________________ ----------------------------------------- Please help guide development at ANSYS by filling in these surveys Public ANSYS ICEM CFD Users Survey This second one is more general (Gambit, TGrid and ANSYS Meshing users welcome)... CFD Online Users Survey

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Gambit problems	Althea	FLUENT	22	January 4, 2017 04:19
3D Hybrid Mesh Errors	DarrenC	ANSYS Meshing & Geometry	11	August 5, 2013 07:42
ICEM Edit Mesh	blackbody	ANSYS Meshing & Geometry	3	March 8, 2010 03:49
Boddy fitted Hexcore Mesh in ICEM Cfd	Mitch	CFX	0	December 29, 2008 07:07
How to corse mesh in icem cfd?	Priety	CFX	2	October 2, 2006 04:57