(gambit)projecting just a part of mesh on another face?

gholamghar · March 11, 2011, 11:19

Hello
Is it possible to copy or project mesh of a face on another face which does not have the same size? for example in the picture i have attached i need to project exactly "face two" mesh on "face one" mesh without splitting "face one", i mean i don't want to mesh entire "face one" i just want the part of "face one" which is exactly below "face two" to be meshed without splitting "face one",is there any way to do this?
thanks in advance

-mAx- · March 14, 2011, 05:24

no you cannot mesh just a part of a surface.
What is the goal for that?

sho · March 14, 2011, 18:14

Hi gholamghar,

Is this what you meant (see attached image)?

March 14, 2011, 05:24		#2
-mAx- Super Moderator Maxime Perelli Join Date: Mar 2009 Location: Switzerland Posts: 3,297 Rep Power: 41	no you cannot mesh just a part of a surface. What is the goal for that? __________________ In memory of my friend Hervé: CFD engineer & freerider

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Face mesh and scheme	Jonny6001	ANSYS Meshing & Geometry	3	June 21, 2010 03:57
[Gmsh] Import problem	ARC	OpenFOAM Meshing & Mesh Conversion	0	February 27, 2010 11:56
[ICEM] How to mesh part by part?	rikio	ANSYS Meshing & Geometry	6	February 24, 2010 20:19
Icemcfd 11: Loss of mesh from surface mesh option?	Joe	CFX	2	March 26, 2007 19:10
[Commercial meshers] Trimmed cell and embedded refinement mesh conversion issues	michele	OpenFOAM Meshing & Mesh Conversion	2	July 15, 2005 05:15