Ansys mesh import problem

sys999 · December 12, 2010, 17:59

Hi,

I'm trying to do a modal analysis in Ansys. Here is my problem:

I've made a mesh with Icem and imported it to Ansys Workbench with the FE Modeler. I've connected it to my Modal Analysis System.
When I'm trying to apply supports in Mechanical I can't select the different faces of the model because the programm smoothes it somehow. I can only select the whole body. So I can't apply the support where I want to.

Thx

Will Anderson · December 12, 2010, 18:39

this is a cfd forum, so don't be surprised if support for fem is scarce.
good luck!

sac · December 12, 2010, 19:12

When you import the mesh via femodeler it puts a "skin" on the mesh.

When in FEModeler you have some control over how this "skin" is created.

Either you can change the cutting angle to pick off surfaces or you can create the surfaces yourself using the picking tool.

I believe the FEModeler help has a section on doing this.

sys999 · December 13, 2010, 12:14

I did it. Thanks for your help...

arif.iut.09 · January 4, 2011, 12:54

hay i am also doing a modal analysis can u help me with that..im using ansys 11.im new to this.how to do the meshing can u help. how do i knw what element type i should select

December 12, 2010, 17:59	Ansys mesh import problem	#1
sys999 New Member Bla Blubb Join Date: Dec 2010 Posts: 11 Rep Power: 15	Hi, I'm trying to do a modal analysis in Ansys. Here is my problem: I've made a mesh with Icem and imported it to Ansys Workbench with the FE Modeler. I've connected it to my Modal Analysis System. When I'm trying to apply supports in Mechanical I can't select the different faces of the model because the programm smoothes it somehow. I can only select the whole body. So I can't apply the support where I want to. Thx

December 12, 2010, 18:39	sounds like a non-cfd problem	#2
Will Anderson Member W.N. Anderson Join Date: Jul 2010 Location: Zürich, Switzerland Posts: 46 Rep Power: 16	this is a cfd forum, so don't be surprised if support for fem is scarce. good luck!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
ANSYS Workbench mesh crashes (ANSYSWBU.exe problem)	kondan	ANSYS	76	February 22, 2024 03:27
Moving mesh	Niklas Wikstrom (Wikstrom)	OpenFOAM Running, Solving & CFD	122	June 15, 2014 07:20
Import ANSYS CFX Mesh to Fluent	Noureddine	FLUENT	6	February 11, 2009 13:33
Problem on mesh import to Ansys CFX 10.0	Stephen Lau	CFX	1	April 18, 2007 04:02
How to control Minximum mesh space?	hung	FLUENT	7	April 18, 2005 10:38

December 12, 2010, 19:12		#3
sac Member Join Date: Jun 2010 Posts: 44 Rep Power: 17	When you import the mesh via femodeler it puts a "skin" on the mesh. When in FEModeler you have some control over how this "skin" is created. Either you can change the cutting angle to pick off surfaces or you can create the surfaces yourself using the picking tool. I believe the FEModeler help has a section on doing this.

December 13, 2010, 12:14		#4
sys999 New Member Bla Blubb Join Date: Dec 2010 Posts: 11 Rep Power: 15	I did it. Thanks for your help...

January 4, 2011, 12:54		#5
arif.iut.09 New Member Join Date: Feb 2010 Posts: 5 Rep Power: 16	hay i am also doing a modal analysis can u help me with that..im using ansys 11.im new to this.how to do the meshing can u help. how do i knw what element type i should select