Catia V5 to ICEM CFD

Prakash.Paudel · October 1, 2010, 12:06

i am trying to import Catia v5 part/model into ICEMCFD using workbench reader and the error i get is as follows :

Importing file D:/prakash.paudel/Desktop/Part1.CATPart
Error: Part manager failed to attach assembly
Current Coordinate system is global
Done

anybody has any idea whats going on ?? any help would be appreciated

Prakash

PSYMN · October 3, 2010, 15:20

It could be that the workbench readers are not properly installed.

Do you have WB installed on your machine? Has this worked for any other files?

If you have WB installed and something like DM or AM licensed, have you tried importing a CatiaV5 file into those products (they use the same reader and it would help us determine if the problem is on the reader end or passing it into ICEM CFD.)

This is the kind of question that is ideal for TechSupp@ANSYS.com.

Best regards,

Simon

eloy785 · May 26, 2011, 17:17

Hi Prakash.Paudel
Basically, the Catia geometry contains an errror, i mean, if you join geometrical setting is necessary to check it, because in any place of the geometry contains a surface with error.

best regards

October 1, 2010, 12:06	Catia V5 to ICEM CFD	#1
Prakash.Paudel New Member Prakash Paudel Join Date: May 2010 Location: Toronto Posts: 25 Rep Power: 16	i am trying to import Catia v5 part/model into ICEMCFD using workbench reader and the error i get is as follows : Importing file D:/prakash.paudel/Desktop/Part1.CATPart Error: Part manager failed to attach assembly Current Coordinate system is global Done anybody has any idea whats going on ?? any help would be appreciated Prakash

October 3, 2010, 15:20	WB readers require WB installed...	#2
PSYMN Senior Member Simon Pereira Join Date: Mar 2009 Location: Ann Arbor, MI Posts: 2,663 Blog Entries: 1 Rep Power: 47	It could be that the workbench readers are not properly installed. Do you have WB installed on your machine? Has this worked for any other files? If you have WB installed and something like DM or AM licensed, have you tried importing a CatiaV5 file into those products (they use the same reader and it would help us determine if the problem is on the reader end or passing it into ICEM CFD.) This is the kind of question that is ideal for TechSupp@ANSYS.com. Best regards, Simon

May 26, 2011, 17:17	Error: Part manager failed to attach assembly	#3
eloy785 New Member eloy vilchis Join Date: Aug 2009 Posts: 4 Rep Power: 17	Hi Prakash.Paudel Basically, the Catia geometry contains an errror, i mean, if you join geometrical setting is necessary to check it, because in any place of the geometry contains a surface with error. best regards

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Need help icem cfd	kakhtar	ANSYS Meshing & Geometry	25	January 31, 2017 02:09
Learn ANSYS ICEM CFD	easy_astronaut	ANSYS	2	December 15, 2013 16:34
[ICEM] Export unstructured periodic mesh from ICEM CFD to Fluent	ivanddd	ANSYS Meshing & Geometry	1	February 3, 2011 01:51
Importing geometry from Pro E to ICEM CFD V5.1	sac	CFX	2	January 16, 2006 09:38
Which is better to develop in-house CFD code or to buy a available CFD package.	Tareq Al-shaalan	Main CFD Forum	10	June 13, 1999 00:27