3d catia models to gambit

doki · July 10, 2010, 07:39

I am trying to import a 3D catia model into gambit using .igs or .stp formats.
when I intend to mesh the geometry, I realize that there are a lot of small edge/faces in the geometry; which makes it impossible to generate a suitable mesh.
how can I fix the problem so that I could get proper mesh?

-mAx- · July 12, 2010, 02:06

Use merge tools (face and/or edge) and size functions.
STP format should be better than IGS

doki · July 12, 2010, 02:35

thanks
stp is sure better than igs.
I see what I can do, but there are a lot of such "broken" parts in the geometry, making it almost impossible to repair all of them manually.
Also, I do not know how to find all of these parts.
anyway, I should thank for your reply.

-mAx- · July 12, 2010, 03:58

if you know where your stuffs come from, you can attempt to correct them in CAD, and then reimport the STP file.
Can you post a picture from what give you problem

doki · July 12, 2010, 05:17

the CAD model does not show any problems in the native software. I guess it is a problem related to the extension.

July 10, 2010, 07:39	3d catia models to gambit	#1
doki Member Join Date: Apr 2009 Posts: 41 Rep Power: 17	I am trying to import a 3D catia model into gambit using .igs or .stp formats. when I intend to mesh the geometry, I realize that there are a lot of small edge/faces in the geometry; which makes it impossible to generate a suitable mesh. how can I fix the problem so that I could get proper mesh?

July 12, 2010, 02:06		#2
-mAx- Super Moderator Maxime Perelli Join Date: Mar 2009 Location: Switzerland Posts: 3,297 Rep Power: 41	Use merge tools (face and/or edge) and size functions. STP format should be better than IGS __________________ In memory of my friend Hervé: CFD engineer & freerider

July 12, 2010, 03:58		#4
-mAx- Super Moderator Maxime Perelli Join Date: Mar 2009 Location: Switzerland Posts: 3,297 Rep Power: 41	if you know where your stuffs come from, you can attempt to correct them in CAD, and then reimport the STP file. Can you post a picture from what give you problem __________________ In memory of my friend Hervé: CFD engineer & freerider

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
3D catia models to gambit	doki	FLUENT	14	July 17, 2010 12:21
[GAMBIT] Catia to Gambit	sbajpai	ANSYS Meshing & Geometry	3	January 9, 2010 13:44
Catia to Gambit	sbajpai	ANSYS	0	January 6, 2010 22:18
catia to gambit	sulilatu	FLUENT	1	December 5, 2006 23:31
Import 3D models to GAMBIT from 3DStudio	Freeman	FLUENT	6	October 12, 2005 14:14

July 12, 2010, 02:35		#3
doki Member Join Date: Apr 2009 Posts: 41 Rep Power: 17	thanks stp is sure better than igs. I see what I can do, but there are a lot of such "broken" parts in the geometry, making it almost impossible to repair all of them manually. Also, I do not know how to find all of these parts. anyway, I should thank for your reply.

July 12, 2010, 05:17		#5
doki Member Join Date: Apr 2009 Posts: 41 Rep Power: 17	the CAD model does not show any problems in the native software. I guess it is a problem related to the extension.