[ Gambit ] How to "duplicate" nodes

Gearb0x · February 15, 2010, 12:51

Hello,
I have an edge with nodes created as I want (this edge is meshed with a boudary layer)

I would like to have the exactly same position of nodes for the edge in front of this one. How can I do that? Is there a way to copy/paste nodes?

I found a way to let gambit mesh a face without specifying nodes on all the edges but gambit doens't mesh it the way I want.

thanks for the help

-mAx- · February 16, 2010, 02:31

In the edge meshing tool, click first on your previous edge (already meshed), and then on the other. Check if the option "Use first edge settings" is enabled.
It should work

Gearb0x · February 16, 2010, 06:16

This was a good idea but this doesn't work because of the boudary layer...

-mAx- · February 16, 2010, 06:43

delete your BL, mesh your opposite edge, and re-create your BL

Gearb0x · February 16, 2010, 06:45

but the things is that I want it mesh as the boundary layer but I cannot put a BL there because it points in the wrong direction and I don't know how to change the direction of BL (the arrow gambits shows when creating one)

thnaks for the help!

-mAx- · February 16, 2010, 07:54

if you have a middle click on your mouse, you can use use it to switch BL-direction

February 15, 2010, 12:51	[ Gambit ] How to "duplicate" nodes	#1
Gearb0x Senior Member Join Date: Nov 2009 Posts: 111 Rep Power: 17	Hello, I have an edge with nodes created as I want (this edge is meshed with a boudary layer) I would like to have the exactly same position of nodes for the edge in front of this one. How can I do that? Is there a way to copy/paste nodes? I found a way to let gambit mesh a face without specifying nodes on all the edges but gambit doens't mesh it the way I want. thanks for the help

February 16, 2010, 02:31		#2
-mAx- Super Moderator Maxime Perelli Join Date: Mar 2009 Location: Switzerland Posts: 3,297 Rep Power: 41	In the edge meshing tool, click first on your previous edge (already meshed), and then on the other. Check if the option "Use first edge settings" is enabled. It should work __________________ In memory of my friend Hervé: CFD engineer & freerider

February 16, 2010, 06:43		#4
-mAx- Super Moderator Maxime Perelli Join Date: Mar 2009 Location: Switzerland Posts: 3,297 Rep Power: 41	delete your BL, mesh your opposite edge, and re-create your BL __________________ In memory of my friend Hervé: CFD engineer & freerider

February 16, 2010, 07:54		#6
-mAx- Super Moderator Maxime Perelli Join Date: Mar 2009 Location: Switzerland Posts: 3,297 Rep Power: 41	if you have a middle click on your mouse, you can use use it to switch BL-direction __________________ In memory of my friend Hervé: CFD engineer & freerider

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Can GAMBIT edit element or nodes ?	pongup	FLUENT	2	July 8, 2008 09:32
Multiple hanging nodes in GAMBIT	Partha	Main CFD Forum	0	March 12, 2008 01:16
Gambit problem: reading the nodes	Li	FLUENT	2	June 10, 2004 14:20
meshing F1 front wing	Steve	FLUENT	0	April 17, 2003 13:37
CFX4.3 -build analysis form	Chie Min	CFX	5	July 13, 2001 00:19

February 16, 2010, 06:16		#3
Gearb0x Senior Member Join Date: Nov 2009 Posts: 111 Rep Power: 17	This was a good idea but this doesn't work because of the boudary layer...

February 16, 2010, 06:45		#5
Gearb0x Senior Member Join Date: Nov 2009 Posts: 111 Rep Power: 17	but the things is that I want it mesh as the boundary layer but I cannot put a BL there because it points in the wrong direction and I don't know how to change the direction of BL (the arrow gambits shows when creating one) thnaks for the help!