Surface generation from points

PincoP · January 13, 2010, 07:35

Hi everyone,

We imported about 2000 terrain coordinates as points in the DesignModeler of Workbench. We are now trying to generate the terrain surface based on these points. Sadly we are still beginner and we don't know the right method to obtain the surface, for example by triangulation between the points.

Any help, short hints as well, will be appreciated!
Thank you very much

Shawn Givler · January 13, 2010, 16:19

Try Geomagic Studio! It is designed and excells specifically for this task.

http://www.geomagic.com/en/

January 13, 2010, 07:35	Surface generation from points	#1
PincoP New Member Join Date: Jan 2010 Posts: 1 Rep Power: 0	Hi everyone, We imported about 2000 terrain coordinates as points in the DesignModeler of Workbench. We are now trying to generate the terrain surface based on these points. Sadly we are still beginner and we don't know the right method to obtain the surface, for example by triangulation between the points. Any help, short hints as well, will be appreciated! Thank you very much

January 13, 2010, 16:19	Creating Surface Triangulation from Point Cloud	#2
Shawn Givler New Member Shawn Givler Join Date: May 2009 Posts: 3 Rep Power: 17	Try Geomagic Studio! It is designed and excells specifically for this task. http://www.geomagic.com/en/

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[Gmsh] Error : Self intersecting surface mesh, computing intersections & Error : Impossible	velan	OpenFOAM Meshing & Mesh Conversion	3	October 22, 2015 12:05
[Gmsh] Problem with Gmsh	nishant_hull	OpenFOAM Meshing & Mesh Conversion	23	August 5, 2015 03:09
[Gmsh] boundaries with gmshToFoam‏	ouafa	OpenFOAM Meshing & Mesh Conversion	7	May 21, 2010 13:43
[blockMesh] BlockMeshmergePatchPairs	hjasak	OpenFOAM Meshing & Mesh Conversion	11	August 15, 2008 08:36
CFX4.3 -build analysis form	Chie Min	CFX	5	July 13, 2001 00:19