[sbajpai]

Thanks to everyone who helped with my previous issue.

Great news I have some Progress about 30 %.

My Project is CFX Simulationof a Flu Virus SPread in a Flight Cabin.

1) I think I have been Successfully been able to construct a Model in Catia V5 R19 that will work in Gambit.

2) I have uploaded my Model Here in Rapidshare, This site ha s alimit of 100KB Where my CatPart is around 600KB.

(This Model is not to scale, As i am not familiar to catia so i decided to make a rough one and see if i am in the Right direction.) I used The Boolean Add Feature to Join Separate Bodies Together into one Single PartBody.

http://rapidshare.com/files/33125038...n.CATPart.html
(There are holes on ceiling, 9 of them in total, which correspond to 9 inlets of AirCon for 9 Seats)

I dont have access to Gambit, If anyone could check my Model and give me there input that weather I am on the right Track.

I honestly have no idea, Any feedback is welcome.

[kingjewel1]

Originally Posted by sbajpai

Thanks to everyone who helped with my previous issue.

Great news I have some Progress about 30 %.

My Project is CFX Simulationof a Flu Virus SPread in a Flight Cabin.

1) I think I have been Successfully been able to construct a Model in Catia V5 R19 that will work in Gambit.

2) I have uploaded my Model Here in Rapidshare, This site ha s alimit of 100KB Where my CatPart is around 600KB.

(This Model is not to scale, As i am not familiar to catia so i decided to make a rough one and see if i am in the Right direction.) I used The Boolean Add Feature to Join Separate Bodies Together into one Single PartBody.

http://rapidshare.com/files/33125038...n.CATPart.html
(There are holes on ceiling, 9 of them in total, which correspond to 9 inlets of AirCon for 9 Seats)

I dont have access to Gambit, If anyone could check my Model and give me there input that weather I am on the right Track.

I honestly have no idea, Any feedback is welcome.

I don't use gambit but tried to import in DM and ICEM, neither of which can create the surfaces.

[sbajpai]

Originally Posted by kingjewel1

I don't use gambit but tried to import in DM and ICEM, neither of which can create the surfaces.

so whats do you think is wrong with the part?

I made it in CatiaV5R19 (is tht supported on these softwares) its a CATpart not an iges file.

Do you use catia? does it open for you in catia alrite?

Any idea what the issue could be?

Thanks for your message

[PSYMN]

If it is a version problem (Catia version is newer and not supported by your older versions of ICEM CFD or Gambit), perhaps you could output it as a CatiaV4 file?

(I have not tried downloading the file myself, so just guessing).