[GAMBIT] problem to import iges file

jackr84 · August 10, 2009, 05:02

Hi, i'm a student, i have a problem. when i ave to make a mesh of a muffler. The geometry of the muffler is produced by a 3D scanner and i exported the geometry as iges file. When i import the geometry in gambit and i try to change geometry to do the mesh there is a problem:

"Can't operate on face v_face... with associated non-real geometry"

Besides when i import the iges file i can't choose option translator spatial but only native.

Can i do? Thank you

-mAx- · August 11, 2009, 02:16

I assume Iges import, creates virtual geometries.
So you cannot use features for real geometries (like boolean operation for example)

August 10, 2009, 05:02	problem to import iges file	#1
jackr84 Member giacomo combariati Join Date: Aug 2009 Posts: 36 Rep Power: 17	Hi, i'm a student, i have a problem. when i ave to make a mesh of a muffler. The geometry of the muffler is produced by a 3D scanner and i exported the geometry as iges file. When i import the geometry in gambit and i try to change geometry to do the mesh there is a problem: "Can't operate on face v_face... with associated non-real geometry" Besides when i import the iges file i can't choose option translator spatial but only native. Can i do? Thank you

August 11, 2009, 02:16		#2
-mAx- Super Moderator Maxime Perelli Join Date: Mar 2009 Location: Switzerland Posts: 3,297 Rep Power: 41	I assume Iges import, creates virtual geometries. So you cannot use features for real geometries (like boolean operation for example) __________________ In memory of my friend Hervé: CFD engineer & freerider

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
OpenFOAM on MinGW crosscompiler hosted on Linux	allenzhao	OpenFOAM Installation	127	January 30, 2009 20:08
[OpenFOAM] ParaView 33 canbt open OpenFoam file	hariya03	ParaView	7	September 25, 2008 18:33
Problem importing iges file to Gambit	Tassos	FLUENT	0	May 7, 2008 05:28
IGES import problem	Kiran	Siemens	2	September 10, 2006 15:18
Results saving in CFD	hawk	Main CFD Forum	16	July 21, 2005 21:51