[ICEM] Meshing advices needed

muketa · July 8, 2009, 07:13

Hi everybody!

For my thesis I have to mesh this geometry

http://img125.imageshack.us/img125/8185/geofluid.jpg

with ICEM 10.0. I've done cfd icem tutorials, but it's still not clear which strategy is better to adopt to obtain a good hexa mesh.

Any suggestion would be appreciated.

Thanks in advance,
muketa

bharath · July 10, 2009, 10:48

hi,
it is not easy to mesh this geometry for a novice.try to do more
geometries of simple in nature and understand the concept of blocking.then you can get good quality hex mesh.

July 8, 2009, 07:13	Meshing advices needed	#1
muketa New Member Join Date: Jul 2009 Posts: 7 Rep Power: 17	Hi everybody! For my thesis I have to mesh this geometry http://img125.imageshack.us/img125/8185/geofluid.jpg with ICEM 10.0. I've done cfd icem tutorials, but it's still not clear which strategy is better to adopt to obtain a good hexa mesh. Any suggestion would be appreciated. Thanks in advance, muketa

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Help needed for meshing the following geometry...	eers	Main CFD Forum	11	June 29, 2009 16:29
[GAMBIT] Help needed with meshing!	fluentnoob	ANSYS Meshing & Geometry	24	June 6, 2009 18:41
Marine current turbine (meshing and stimulation help needed!!)	coolyihao	FLOW-3D	0	March 16, 2009 12:48
urgent help needed for meshing in GAMBIT	chris	FLUENT	0	September 5, 2002 10:18
Problems meshing a pie-shape cross-section bar-suggestions or workarounds needed	Ricky Wong	FLUENT	1	May 11, 2000 18:35

July 10, 2009, 10:48		#2
bharath Senior Member Bharath kumar Join Date: Apr 2009 Posts: 169 Rep Power: 17	hi, it is not easy to mesh this geometry for a novice.try to do more geometries of simple in nature and understand the concept of blocking.then you can get good quality hex mesh.