Prefix to Show Which Meshing Software

jola · March 17, 2009, 11:55

After just two days online with this ANSYS meshing sub-forum I already see a problem. ANSYS has several meshing softwares (Gambit, ICEM, ...) and it should always be clear which software a certain thread is about. We can add a required prefix for all threads here so that everyone who posts a message has to specify a prefix showing which software the message is about. But please help us to define which prefixes we should use? Clearly Gambit and ICEM are two possibilities, but do we need any more prefixes? We should use as many prefixes as is required, but keep the number of prefixes as low as possible to make it easy to overview.

gskillas · March 18, 2009, 09:48

Hello Jonas

besides Gambit and ICEM include tgrid as a prefix.

Regards,

George

pete · March 20, 2009, 04:43

Hi gskillas,

I have just added "GAMBIT", "ICEM", "TGrid" and "Other" as available prefixes to selct when posting a new thread in this forum. That should help reduce the confusion. Thanks for your advice.

-mAx- · October 25, 2011, 02:06

Hi,
Is there a way enforcing people to give one prefix?
I mean no possibiliy to post if none is selected?
Cheers

pete · October 27, 2011, 06:19

We could enforce a prefix so that it is impossible to post without selecting a prefix. Do you suggest that we do that on the Ansys meshing forum?

-mAx- · October 27, 2011, 06:26

From my side yes.
Then a email notification for forum subscription with Prefix-filter would be great.
I work only with Gambit....

March 17, 2009, 11:55	Prefix to Show Which Meshing Software	#1
jola Administrator Jonas Larsson Join Date: Jan 2009 Location: Gothenburg, Sweden Posts: 838 Rep Power: 10	After just two days online with this ANSYS meshing sub-forum I already see a problem. ANSYS has several meshing softwares (Gambit, ICEM, ...) and it should always be clear which software a certain thread is about. We can add a required prefix for all threads here so that everyone who posts a message has to specify a prefix showing which software the message is about. But please help us to define which prefixes we should use? Clearly Gambit and ICEM are two possibilities, but do we need any more prefixes? We should use as many prefixes as is required, but keep the number of prefixes as low as possible to make it easy to overview.

March 18, 2009, 09:48	Another Prefix to add	#2
gskillas New Member Join Date: Mar 2009 Posts: 5 Rep Power: 17	Hello Jonas besides Gambit and ICEM include tgrid as a prefix. Regards, George

October 25, 2011, 02:06		#4
-mAx- Super Moderator Maxime Perelli Join Date: Mar 2009 Location: Switzerland Posts: 3,297 Rep Power: 41	Hi, Is there a way enforcing people to give one prefix? I mean no possibiliy to post if none is selected? Cheers __________________ In memory of my friend Hervé: CFD engineer & freerider

October 27, 2011, 06:26		#6
-mAx- Super Moderator Maxime Perelli Join Date: Mar 2009 Location: Switzerland Posts: 3,297 Rep Power: 41	From my side yes. Then a email notification for forum subscription with Prefix-filter would be great. I work only with Gambit.... __________________ In memory of my friend Hervé: CFD engineer & freerider

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Meshing software	Mudit	Main CFD Forum	2	July 8, 2008 05:30
Particle Prefix	chayriss	CFX	0	November 15, 2006 07:52
free meshing software	Vincent	Main CFD Forum	1	March 21, 2006 10:43
need software to heal/prepare geometry for meshing	Mike Marcu	Main CFD Forum	0	September 20, 2005 12:38

March 20, 2009, 04:43		#3
pete Administrator Peter Jones Join Date: Jan 2009 Posts: 682 Rep Power: 10	Hi gskillas, I have just added "GAMBIT", "ICEM", "TGrid" and "Other" as available prefixes to selct when posting a new thread in this forum. That should help reduce the confusion. Thanks for your advice.

October 27, 2011, 06:19		#5
pete Administrator Peter Jones Join Date: Jan 2009 Posts: 682 Rep Power: 10	We could enforce a prefix so that it is impossible to post without selecting a prefix. Do you suggest that we do that on the Ansys meshing forum?