|
[Sponsors] |
[Workbench] Need help with aspect ratio and orthogonal quality |
![]() |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
![]() |
![]() |
#1 |
New Member
John
Join Date: Jul 2024
Posts: 1
Rep Power: 0 ![]() |
Hi CFD Family,
Regarding my thesis project, I need to conduct a CFD simulation for my part. I am relatively new to CFD simulation. Although I attempted to proceed using YouTube tutorials, it did not work out in my case. I need to study the fluid behavior in the channels of my part. While I have done the meshing, its quality is very poor. The aspect ratio is 32, and the orthogonal quality is 0.06. I want to improve these two metrics. Could someone please assist me? I have very little time left to submit my thesis. I have uploaded pictures and the values I used for the meshing. Please kindly correct them and help me improve the mesh quality. (blue color is aspect ratio results and mixed colour is orthogonal quality ) Thank you. |
|
![]() |
![]() |
![]() |
Tags |
aspect ratio, orthogonal quality |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
[ICEM] Need help: High aspect ratio and very low orthogonal quality mesh in boundary | vietle | ANSYS Meshing & Geometry | 7 | May 19, 2023 11:27 |
what is the proper aspect ratio? | ROY4 | CFX | 11 | April 24, 2018 14:11 |
Min.Orthogonal Quality and Max. Aspect Ratio Ambiguity | oozcan | FLUENT | 0 | November 15, 2016 05:44 |
[ICEM] H-block, Orthogonal Quiality, High Aspect ratio | jyh3134 | ANSYS Meshing & Geometry | 1 | September 3, 2015 11:35 |
Aspect ratio in orthogonal mesh | bmikuz | Mesh Generation & Pre-Processing | 0 | June 14, 2014 10:33 |