[TurboGrid] Why turbogrid does not fit topology/mesh to the geometry

Mohsin1 · July 15, 2024, 05:01

Is there an option to fit topology to the geometry in turbogrid manually?
See the following pictures..

https://drive.google.com/file/d/1oCY...usp=drive_link
https://drive.google.com/file/d/1Fzj...usp=drive_link

PacMan · November 8, 2024, 11:44

I'm new to turbogrid, but I have the same question.
I looked for exporting, you can export the geometry to a .tin file and then open it in ICEM, the geometry is there, but the lines are somewhat chaotic (you need some cleaning). Hope there is a faster method

July 15, 2024, 05:01	Why turbogrid does not fit topology/mesh to the geometry	#1
Mohsin1 New Member Mohsin Join Date: Jul 2023 Posts: 21 Rep Power: 3	Is there an option to fit topology to the geometry in turbogrid manually? See the following pictures.. https://drive.google.com/file/d/1oCY...usp=drive_link https://drive.google.com/file/d/1Fzj...usp=drive_link

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Geometry from FreeCAD to Fluent	Pepithrow	FLUENT	0	June 14, 2024 07:09
[snappyHexMesh] doesn't fit the geometry what i expected	main	OpenFOAM Meshing & Mesh Conversion	8	January 30, 2024 05:45
[ANSYS Meshing] CATIA Geometry Generation and Meshing	danielsullivan	ANSYS Meshing & Geometry	0	April 3, 2017 22:11
how to import geometry file to turbogrid	summerverycool	ANSYS Meshing & Geometry	0	July 2, 2013 05:44
[ANSYS Meshing] TurboGrid export geometry after meshing	la7low	ANSYS Meshing & Geometry	0	January 13, 2011 20:50

November 8, 2024, 11:44		#2
PacMan New Member Alan Join Date: Dec 2021 Posts: 8 Rep Power: 5	I'm new to turbogrid, but I have the same question. I looked for exporting, you can export the geometry to a .tin file and then open it in ICEM, the geometry is there, but the lines are somewhat chaotic (you need some cleaning). Hope there is a faster method