[ICEM] Problem while launching ICEM

lewisfry · May 21, 2024, 16:52

Hey everyone,

For my semester project, I have to use ICEM to generate meshes. However, it is my first time using ICEM. Although all of the remaining ANSYS Products work well on my computer, I am having this kind of error while trying to launch ICEM.

I would be very grateful if you have already seen this error before and want to help me

PS: The University provided us fully licensed server therefore I am not using an academic one. I have ANSYS 2024 R1 and my OS is Windows 11 Home.

waderatke · June 10, 2024, 23:39

Make sure the license is set up and enabled correctly. You can check the license configuration by going to `Start` > `All Programs` > `ANSYS 2024 R1` > `License Manager` and check the license status.

June 10, 2024, 23:39		#2
waderatke New Member Join Date: Jun 2024 Posts: 1 Rep Power: 0	Make sure the license is set up and enabled correctly. You can check the license configuration by going to `Start` > `All Programs` > `ANSYS 2024 R1` > `License Manager` and check the license status. __________________ geometry dash

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[Commercial meshers] Problem with cyclic boundaries in Openfoam 2.3, mesh import from ICEM	Scabbard	OpenFOAM Meshing & Mesh Conversion	29	October 6, 2020 22:14
[ICEM] ICEM CFD Problem with the boundary conditions while importing the mesh to fluent	sonic109	ANSYS Meshing & Geometry	2	September 3, 2014 01:56
Problem with usnstruct mesh Icem Tribometer	obliz	ANSYS	0	July 10, 2014 04:09
[ICEM] ICEM problem when doing not so fine mesh	DudaAPD	ANSYS Meshing & Geometry	0	April 30, 2014 17:59
ICEM boundary condition problem	Martin_D	ANSYS Meshing & Geometry	2	February 14, 2011 11:20