[ICEM] Association problem meshing coil pipe

AssemKhaled · August 3, 2023, 09:19

I am trying to mesh a coil pipe as in figure
I always face this mesh problem like there is a conflict in association like in figure attached
I tried to dis associate and then re associate but it did not work
could any one help please?

leodan · August 4, 2023, 02:12

There is a Youtube video available already on a similar geometry and meshing where they have explained the association part. The mesh seems reasonable, so you can follow the same.

Gert-Jan · August 4, 2023, 10:19

Alternatively, only mesh the T-junction and then extrude the mesh on the ends of the T-junction along the curve/spline of the coil. Much easier.......
To extrude a mesh look for the second or third Icon in Edit Mesh-menu

August 4, 2023, 02:12	Youtube tutorial available for the same	#2
leodan New Member Anonymous Join Date: Jul 2022 Posts: 6 Rep Power: 4	There is a Youtube video available already on a similar geometry and meshing where they have explained the association part. The mesh seems reasonable, so you can follow the same.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[GAMBIT] Problem in meshing a pipe within a cylinder	l14766	ANSYS Meshing & Geometry	7	May 14, 2013 18:24
pipe flow problem	RodriguezFatz	FLUENT	2	August 9, 2011 08:59
Gambit - meshing over airfoil wrapping (?) problem	JFDC	FLUENT	1	July 11, 2011 06:59
GAMBIT meshing problem	Gauthier Lambert	Main CFD Forum	1	August 3, 2000 10:22
fluid flow fundas	ram	Main CFD Forum	5	June 17, 2000 22:31

August 4, 2023, 10:19		#3
Gert-Jan Senior Member Gert-Jan Join Date: Oct 2012 Location: Europe Posts: 1,903 Rep Power: 28	Alternatively, only mesh the T-junction and then extrude the mesh on the ends of the T-junction along the curve/spline of the coil. Much easier....... To extrude a mesh look for the second or third Icon in Edit Mesh-menu