[ICEM] Technical issue with GUI

movingcase4 · August 18, 2022, 23:48

Hello, I just installed student-licensed ANSYS.
When I start ICEM CFD, the 3D workspace is stuck at green screen.
Usually I am supposed to see XYZ axis on the bottom right corner and blue gradient background(default option).
It does not seem like a license problem because I do not get any error messages.
But everything works just fine. I can still create points and lines, etc. I just connot see anything.

Thank you in advace for your help!

just in case, I'll write my laptop spec.
CPU: Ryzen 9 5900HX with Radeon Graphics
GPU1: AMD Radeon(TM) Graphics
GPU2: Nvidia GeForce RTX3070 Laptop GPU

alainislas · August 21, 2022, 19:02

Have you tried to reseting to default settings? Settings -> Reset

For the XYZ axes, try Settings -> Display -> Show XYZ Axes

Aso, you can try Settings -> Background style and change the green color for white or black, which personally, I prefer to work with.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Issue on zeroGradient BC for system rotation	magnushaese	OpenFOAM Running, Solving & CFD	2	January 28, 2022 14:43
rhoCentralFoam inviscid airfoil issue (Foam::error::printStack(Foam::Ostream&) at ??)	kmkb21	OpenFOAM Running, Solving & CFD	1	March 1, 2018 02:07
Prism Layer - Core Mesh Boundary Issue	InfernoxCJC	STAR-CCM+	7	November 21, 2017 16:46
ANSYS, GUI Startup Issue	utengr	ANSYS	0	October 4, 2017 01:11
foamToTecplot360 issue with multiregion solvers	manuc	OpenFOAM Post-Processing	2	November 21, 2016 14:51

August 21, 2022, 19:02		#2
alainislas Senior Member Alain Islas Join Date: Nov 2019 Location: Mexico Posts: 142 Rep Power: 7	Have you tried to reseting to default settings? Settings -> Reset For the XYZ axes, try Settings -> Display -> Show XYZ Axes Aso, you can try Settings -> Background style and change the green color for white or black, which personally, I prefer to work with.