 |
 |
 |
|
|
|
[Sponsors] | ||||
February 27, 2020, 08:44
|
Problems with ICEM inflation layer
|
#1 |
|
New Member
Steffan Price
Join Date: Feb 2020
Posts: 6
Rep Power: 6  |
I have applied an inflation layer to a curve in a 2D mesh. The inflation layer does not extend to the end elements. Where the curve meets the adjacent curves the mesh becomes very poor quality due to the difference in element size. I have tried adding a geometric bunching to the adjacent curves to fix this but it is not working. Is there any way to extend the inflation layer to the end element, or fix the adjacent wall. Thanks
|
|
|
|
|
 |
| Tags |
| icem, inflation layer, mesh 2d |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| [ICEM] Problems with coedge curves and surfaces | tommymoose | ANSYS Meshing & Geometry | 6 | December 1, 2020 12:12 |
| [snappyHexMesh] problems generating clean mesh | Christian_tt | OpenFOAM Meshing & Mesh Conversion | 2 | June 20, 2019 06:39 |
| [ANSYS Meshing] Why is it always the inflation layer has poor element quality | AS_Aero | ANSYS Meshing & Geometry | 1 | October 1, 2018 17:03 |
| [snappyHexMesh] sHM layer process keeps getting killed | MBttR | OpenFOAM Meshing & Mesh Conversion | 4 | August 15, 2016 04:21 |
| errors | Fahad | Main CFD Forum | 0 | March 23, 2004 14:20 |
Linear Mode
