[DesignModeler] Edge changed after importing CAD to DesignModeler

ntm5702 · August 2, 2018, 03:44

Hi all,

I'm very new to DesignModeler and I encountered a problem shown in the attached picture. I export the CAD file as *.sat file, then import this 2D geometry to DesignModeler. When I select edges, I found some circles are complete while some others are incomplete, only a small part of the circle. I'm pretty sure these circles are same in CAD and have no idea why this strange edge appears. If I process to mesh, these edges remain incomplete. Since I need to assign different boundary condition to different circles, I'm also worried that the boundary condition could be incomplete.

Anyone have encountered this problems before? Thanks in advance!

ntm5702 · August 2, 2018, 04:11

The picture is here, and the green region is edge.

Rajaero · August 2, 2018, 23:52

Hi,
suggestions:
1. try to delete the edge in space claim
2. try use other cad file format
3. it is better to design this simple 2D model in space claim itself

Thanks...

ntm5702 · August 3, 2018, 01:27

Thanks for your reply! I will try to do it with Spaceclaim. Thank you.

August 2, 2018, 03:44	Edge changed after importing CAD to DesignModeler	#1
ntm5702 New Member ntm5702 Join Date: May 2018 Posts: 3 Rep Power: 8	Hi all, I'm very new to DesignModeler and I encountered a problem shown in the attached picture. I export the CAD file as *.sat file, then import this 2D geometry to DesignModeler. When I select edges, I found some circles are complete while some others are incomplete, only a small part of the circle. I'm pretty sure these circles are same in CAD and have no idea why this strange edge appears. If I process to mesh, these edges remain incomplete. Since I need to assign different boundary condition to different circles, I'm also worried that the boundary condition could be incomplete. Anyone have encountered this problems before? Thanks in advance!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Importing airfoil E180 to DesignModeler	Student_master54321	Main CFD Forum	0	December 23, 2017 13:30
Importing CAD geometry and Editing edges to match	Ahmed	CFX	15	March 21, 2016 13:39
Error importing blade in DesignModeler	Sandman	CFX	2	November 7, 2007 20:05
importing cad into gambit	Adam St. john	FLUENT	2	January 4, 2006 08:36
Importing from CAD package	SugIn	FLUENT	8	October 25, 2000 11:52

August 2, 2018, 23:52		#3
Rajaero Member Taiwan,new north city Join Date: Aug 2017 Location: Taiwan Posts: 74 Rep Power: 9	Hi, suggestions: 1. try to delete the edge in space claim 2. try use other cad file format 3. it is better to design this simple 2D model in space claim itself Thanks...

August 3, 2018, 01:27		#4
ntm5702 New Member ntm5702 Join Date: May 2018 Posts: 3 Rep Power: 8	Thanks for your reply! I will try to do it with Spaceclaim. Thank you.