[ICEM] I can't creat a correct block. -- CFD Online Discussion Forums

April 29, 2018, 09:16	I can't creat a correct block.	#1
496047140 New Member liu-chang Join Date: Apr 2018 Posts: 5 Rep Power: 8	When i use 2d planar to creat a block,there is nothing but only 3 lines.My model is 2D. After i creat a surface,the problem is solved. V17.2 But why?? Thanks!!

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Is my Dynamic mesh setup correct?	cfd seeker	FLUENT	16	October 30, 2020 07:16
[ICEM] Subtracting One block from another block	shivasluzz	ANSYS Meshing & Geometry	2	November 21, 2014 21:38
[blockMesh] Mixer mesh - negative volume problem	jadtwo	OpenFOAM Meshing & Mesh Conversion	2	November 6, 2014 17:37
T-Rex block next to structured block	Aeronautics El. K.	Pointwise & Gridgen	7	August 10, 2014 08:42
[ICEM] Block meshing strategy for a radiused cylinder	Polarbear	ANSYS Meshing & Geometry	2	June 18, 2014 15:24

All times are GMT -4. The time now is 21:56.