[ANSYS Meshing] Reducing skewness with simple thin cylinder plus one dimple -- CFD Online Discussion Forums

November 27, 2017, 02:52

Reducing skewness with simple thin cylinder plus one dimple

kyjc3311

New Member

kim yeon jong

Join Date: Oct 2016

Posts: 1

Rep Power: 0

Hi, I'm trying to make good quality of mesh with a thin cylinder and a dimple.

I had good quality of mesh without the dimple.
However when I add one dimple on inner side of cylinder, I have problems with error & skewness.

I had just one solid, and the first thing that I had done is solving the error with "edge intersection" by put the Defeature Size = 0.001m, and Min Size = 0.001m

After that, I always get high level of skewness like the picture below.

Could anybody help me? Any ideas?

Attached Images

	1.jpg (74.6 KB, 14 views)
	2.jpg (113.2 KB, 14 views)

Tags

ansys 18.2, dimple, mesh, strategy

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[blockMesh] could anyone post a simple cylinder mesh	guilherme	OpenFOAM Meshing & Mesh Conversion	46	October 23, 2020 18:18
Creating thin slice out of a cylinder	lakhi	FLUENT	0	March 4, 2014 02:09
Help - Simple Time-Temp Modelling - 2D Cylinder	Tatey	FLUENT	0	February 27, 2012 08:26
How do I create a simple cylinder with a mesh	s_lab	FLUENT	1	January 27, 2011 03:08
Meshing a cylinder vs. skewness	hbf	ANSYS Meshing & Geometry	0	June 9, 2009 06:19

All times are GMT -4. The time now is 00:51.