Home > Forums > Software User Forums > ANSYS > ANSYS Meshing & Geometry

[ANSYS Meshing] Meshing for Separated airfoil (e.g. canard with wing)

Updated Threads

Reply

Search this Thread

June 10, 2017, 08:51	Meshing for Separated airfoil (e.g. canard with wing)	#1
alaspina New Member Alex Join Date: Mar 2017 Posts: 9 Rep Power: 9	Hello, I have a NACA 0012 configuration with a canard. I want to make an unstructured but refined mesh between the two airfoils, and want boundary layer effects to be visible on both airfoils. What techniques may I use? I've actually asked this before but wasn't as direct. Any help is appreciated.

Reply

Tags

canard, meshing

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Suggestions needed for meshing a CC wing	niablis	Mesh Generation & Pre-Processing	0	February 17, 2016 00:32
[ICEM] Meshing a wing with a wind gallery	crostolo	ANSYS Meshing & Geometry	0	July 25, 2013 14:13
[snappyHexMesh] Meshing 3D wing (hydrofoil) fails	klausb	OpenFOAM Meshing & Mesh Conversion	0	December 28, 2011 15:26
[ANSYS Meshing] Icem 2d meshing for multi-element airfoil	tetsuya	ANSYS Meshing & Geometry	0	November 10, 2011 06:19
[GAMBIT] Problematic meshing of an inverted airfoil	snkutta	ANSYS Meshing & Geometry	2	October 11, 2011 14:23

All times are GMT -4. The time now is 18:50.