[arunintn]

Hello Every one,
The problem is when i read mesh on fluent it shows that it have an error and i think that i was making some mistake in meshing.

The error:
eading "D:Mesh\fluent.msh"...
218811 nodes.
1173538 tetrahedral cells, zone 6.
2309061 triangular interior faces, zone 7.
Warning: Invalid face type 17. Skipping.
558 triangular velocity-inlet faces, zone 9.
712 triangular outflow faces, zone 10.
3015 triangular wall faces, zone 11.
7438 triangular wall faces, zone 12.

Building...
mesh
WARNING: Cell 55 of thread 6 is missing face 3.
Cell Centroid is (219.461326, 84.190658, -1291.033701).
Clearing partially read grid.

Error: Build Grid: Aborted due to critical error.
Error Object: #f

Reading "D:Mesh\test cube.msh"...
16922 nodes.
87860 tetrahedral cells, zone 8.
171967 triangular interior faces, zone 9.
Warning: Invalid face type 17. Skipping.
867 triangular wall faces, zone 11.
1720 triangular wall faces, zone 12.
86 triangular velocity-inlet faces, zone 13.
84 triangular outflow faces, zone 14.

Building...
mesh
WARNING: Cell 102 of thread 8 is missing face 3.
Cell Centroid is (0.979784, 1.005996, 0.116820).
Clearing partially read grid.

Error: Build Grid: Aborted due to critical error.
Error Object: #f

I tried again with different mesh file that i have done long back it was reading with out any error.

I did two different model recently and also one easy model to test and all the model i did now show the same error. i feel that i'm the one who is making the error.

I would appreciate help on this. Thank you!

[mechy]

I have the same problem
did you solve this problem ?

[arunintn]

Yes, I should have posted it long back. It happens with you use wall and sold in boundary.

can you just upload your mesh (as a picture) with boundary.

I changed to wall instead of solid because it was hallow in my case.