[ICEM] How to start ICEM CFD?

Kopzr · March 24, 2016, 10:22

Hello everyone,

I am sorry for asking such a simple question.

I've recently downloaded ANSYS 16.2 Student as I am taking classes on CFD.

For starters we were asked to follow the following tutorial:
http://home.cc.umanitoba.ca/~engsjo/...duct-v1p01.pdf

My problem is that i cannot find a way to start ICEM CFD in order to create the geometry and the mesh. By searching the instalation folders I've been able to find some files related to ICEM, but no executable, and i can't find the option to open ICEM through the Ansys Workbench. Here is a screenshot my options at the workbench:
http://i.imgur.com/yuGo6ED.png

My machine is currently running Windows 10.

Far · March 24, 2016, 12:56

in start menu search "ICEM" or "ICEM CFD"

Kopzr · March 24, 2016, 13:47

It didn't find anything, i will try to reinstall ANSYS and see what happens

Kopzr · March 25, 2016, 14:58

No luck, reinstalling did not fix the issue

wiggles8x0 · July 6, 2016, 13:38

having the same trouble! I have no idea where it is or how to open it. I'm honestly not even sure if it is included in the student version or if it's only for the full version?

bluebase · July 7, 2016, 07:40

Hi Yoshi,
i don't know whether it is included in the Student version.
Check the installtion directory for icem to be sure.
for windows:
InstallDir\v160\icemcfd\win64_amd\bin\icemcfd.bat
for linux:
InstallDir/v160/icemcfd/linux64_amd/bin/icemcfd
(replace InstallDir, of course)

wiggles8x0 · July 7, 2016, 09:04

Nope I can't find it anywhere on my computer! I'm currently using version 16.2 so maybe they removed it for this version or integrated it somewhere in workbench itself?

I've tried finding it but the only trace I can find is when you insert a METHOD on the mesh when meshing, there is an option to create ICEM files (if you change method from automatic). But even though it creates those files, I don't get how to open them in ICEM! haha, it's very frustrating

https://www.youtube.com/watch?v=MS5SFmHIYCY
The video above shows ICEM CFD on the side plane of the workbench but mine doesn't have that!
Capture.jpg

PS. Going to uninstall 16.2 and try and see if there are any changes in 17.0!

Far · July 7, 2016, 09:18

did you slelect ICEM CFD option while installing??

wiggles8x0 · July 7, 2016, 11:19

There isn't an option for it unfortunately!
Capture.JPG

Though I did manage to find the ICEM CFD file in the addins, just not sure what to do with it
Capture2.JPG

UPDATE: Version 17.0 has the same sidebar so still no way of finding/opening ICEM CFD!

siw · July 8, 2016, 05:02

What academic license do you have, my guess is http://www.ansys.com/en-GB/Products/.../ANSYS-Student, which does not mention ICEM? See the ANSYS Installation and Licensing Guide (help/ai_instl/alicprodtabtlm72600.html) for a list of all the exact licence names. It could be that you do not get ICEM with that particular academic license.

Far · July 8, 2016, 05:38

I guess they are talking about student version which is free, but limited in problem size. So I assume it should provide all features...

Or may be they just want student to practice the fluent/cfx/fea tutorials and once they are good in bascis they should buy it

wiggles8x0 · July 8, 2016, 10:01

haha shucks, guess I'll have to kiss my social life goodbye and learn GridPro

. I needed Plot3D format for meshing is why I was interested in ICEM!

Far · July 8, 2016, 10:19

why you dont ask guys at ansys. As it was just my personel point of view and does not refelct any thing on behalf of ANSYS.

wiggles8x0 · July 8, 2016, 11:33

They don't offer customer support for the academic version haha, oh I wish I could!

March 24, 2016, 10:22	How to start ICEM CFD?	#1
Kopzr New Member Renan Join Date: Mar 2016 Posts: 4 Rep Power: 10	Hello everyone, I am sorry for asking such a simple question. I've recently downloaded ANSYS 16.2 Student as I am taking classes on CFD. For starters we were asked to follow the following tutorial: http://home.cc.umanitoba.ca/~engsjo/...duct-v1p01.pdf My problem is that i cannot find a way to start ICEM CFD in order to create the geometry and the mesh. By searching the instalation folders I've been able to find some files related to ICEM, but no executable, and i can't find the option to open ICEM through the Ansys Workbench. Here is a screenshot my options at the workbench: http://i.imgur.com/yuGo6ED.png My machine is currently running Windows 10.

July 7, 2016, 11:19		#9
wiggles8x0 New Member Yoshi Toshi Join Date: Mar 2016 Posts: 29 Rep Power: 10	There isn't an option for it unfortunately! Capture.JPG Though I did manage to find the ICEM CFD file in the addins, just not sure what to do with it Capture2.JPG UPDATE: Version 17.0 has the same sidebar so still no way of finding/opening ICEM CFD! Last edited by wiggles8x0; July 7, 2016 at 12:28.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
TimeVaryingMappedFixedValue	irishdave	OpenFOAM Running, Solving & CFD	32	June 16, 2021 07:55
Sample not working correctly	sihaqqi	OpenFOAM Running, Solving & CFD	1	July 12, 2014 02:36
Partition does not start on physical sector boundary!!??	immortality	Lounge	1	December 8, 2013 16:04
Possible Bug in pimpleFoam (or createPatch) (or fluent3DMeshToFoam)	cfdonline2mohsen	OpenFOAM	3	October 21, 2013 10:28
Problem in running ICEM grid in Openfoam	Tarak	OpenFOAM	6	September 9, 2011 18:51

March 24, 2016, 12:56		#2
Far Senior Member Sijal Join Date: Mar 2009 Location: Islamabad Posts: 4,558 Blog Entries: 6 Rep Power: 54	in start menu search "ICEM" or "ICEM CFD"

March 24, 2016, 13:47		#3
Kopzr New Member Renan Join Date: Mar 2016 Posts: 4 Rep Power: 10	It didn't find anything, i will try to reinstall ANSYS and see what happens

March 25, 2016, 14:58		#4
Kopzr New Member Renan Join Date: Mar 2016 Posts: 4 Rep Power: 10	No luck, reinstalling did not fix the issue

July 6, 2016, 13:38		#5
wiggles8x0 New Member Yoshi Toshi Join Date: Mar 2016 Posts: 29 Rep Power: 10	having the same trouble! I have no idea where it is or how to open it. I'm honestly not even sure if it is included in the student version or if it's only for the full version?

July 7, 2016, 07:40		#6
bluebase Senior Member Sebastian Engel Join Date: Jun 2011 Location: Germany Posts: 567 Rep Power: 21	Hi Yoshi, i don't know whether it is included in the Student version. Check the installtion directory for icem to be sure. for windows: InstallDir\v160\icemcfd\win64_amd\bin\icemcfd.bat for linux: InstallDir/v160/icemcfd/linux64_amd/bin/icemcfd (replace InstallDir, of course)

July 7, 2016, 09:04		#7
wiggles8x0 New Member Yoshi Toshi Join Date: Mar 2016 Posts: 29 Rep Power: 10	Nope I can't find it anywhere on my computer! I'm currently using version 16.2 so maybe they removed it for this version or integrated it somewhere in workbench itself? I've tried finding it but the only trace I can find is when you insert a METHOD on the mesh when meshing, there is an option to create ICEM files (if you change method from automatic). But even though it creates those files, I don't get how to open them in ICEM! haha, it's very frustrating https://www.youtube.com/watch?v=MS5SFmHIYCY The video above shows ICEM CFD on the side plane of the workbench but mine doesn't have that! Capture.jpg PS. Going to uninstall 16.2 and try and see if there are any changes in 17.0!

July 7, 2016, 09:18		#8
Far Senior Member Sijal Join Date: Mar 2009 Location: Islamabad Posts: 4,558 Blog Entries: 6 Rep Power: 54	did you slelect ICEM CFD option while installing??

July 8, 2016, 05:38		#11
Far Senior Member Sijal Join Date: Mar 2009 Location: Islamabad Posts: 4,558 Blog Entries: 6 Rep Power: 54	I guess they are talking about student version which is free, but limited in problem size. So I assume it should provide all features... Or may be they just want student to practice the fluent/cfx/fea tutorials and once they are good in bascis they should buy it

July 8, 2016, 10:01		#12
wiggles8x0 New Member Yoshi Toshi Join Date: Mar 2016 Posts: 29 Rep Power: 10	haha shucks, guess I'll have to kiss my social life goodbye and learn GridPro . I needed Plot3D format for meshing is why I was interested in ICEM!

July 8, 2016, 10:19		#13
Far Senior Member Sijal Join Date: Mar 2009 Location: Islamabad Posts: 4,558 Blog Entries: 6 Rep Power: 54	why you dont ask guys at ansys. As it was just my personel point of view and does not refelct any thing on behalf of ANSYS.

July 8, 2016, 11:33		#14
wiggles8x0 New Member Yoshi Toshi Join Date: Mar 2016 Posts: 29 Rep Power: 10	They don't offer customer support for the academic version haha, oh I wish I could!