[ANSYS Meshing] Problem in geometry meshing

Itachi11 · March 15, 2016, 02:29

Hi guys,

I am trying to mesh geometry of pressure swirl atomizer. But I am getting errors while doing it. I searched various threads but still I am not able to fix this problem.
Errors I got-

1) The following surfaces may intersect other surfaces in the model, Please mesh with a larger element size, use virtual topology or correct CAD geometry.

2) A mesh could not be generated using the current meshing options and settings. Hint: The problem geometry areas might have been highlighted. Switching to wireframe mode may make them more visible.

I have used share topology function also. But still I am getting this errors. I am attaching the iges format.

PSA3.zip

bboynido · March 15, 2016, 05:20

try to chose a larger size for the minimum size of elements and see what changes .
I tried to mesh the model using Ansys meshing but it doesn't work.I ran a topology using ICEM-CFD and it brought a lot of mistakes in the geometry probably you should go back to CAD and try to rebuild your model then import it to your meshing software as IGES or Parasolid file (x_t).

Itachi11 · March 15, 2016, 10:36

Thank you very much Nader for Quick reply.
As you said I went back to CAD model and made the geometry in a single huge part.
Now I am not getting any error with a very fine mesh.

bboynido · March 15, 2016, 15:38

You're welcome anytime, glad that it works now

March 15, 2016, 02:29	Problem in geometry meshing	#1
Itachi11 New Member Kushal Join Date: Mar 2016 Location: INDIA Posts: 4 Rep Power: 10	Hi guys, I am trying to mesh geometry of pressure swirl atomizer. But I am getting errors while doing it. I searched various threads but still I am not able to fix this problem. Errors I got- 1) The following surfaces may intersect other surfaces in the model, Please mesh with a larger element size, use virtual topology or correct CAD geometry. 2) A mesh could not be generated using the current meshing options and settings. Hint: The problem geometry areas might have been highlighted. Switching to wireframe mode may make them more visible. I have used share topology function also. But still I am getting this errors. I am attaching the iges format. PSA3.zip

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Airfoil simulation - Divergence of the results - Mesh or geometry problem ?	Pol.P	FLUENT	9	March 7, 2022 18:21
[ANSYS Meshing] Meshing problem in a constricted geometry	kozden	ANSYS Meshing & Geometry	0	December 18, 2013 04:39
[Gmsh] Problem meshing an imported geometry	Alicia	OpenFOAM Meshing & Mesh Conversion	0	March 30, 2010 05:53
Problem meshing turb. blade tip clearance geometry	Balu	FLUENT	0	June 7, 2008 22:10
Meshing problem in GAMBIT	Vidya Raja	FLUENT	0	May 21, 2006 00:31

March 15, 2016, 05:20		#2
bboynido New Member Nader Khattabi Join Date: Mar 2016 Location: Tunisia Posts: 23 Rep Power: 10	try to chose a larger size for the minimum size of elements and see what changes . I tried to mesh the model using Ansys meshing but it doesn't work.I ran a topology using ICEM-CFD and it brought a lot of mistakes in the geometry probably you should go back to CAD and try to rebuild your model then import it to your meshing software as IGES or Parasolid file (x_t).

March 15, 2016, 10:36		#3
Itachi11 New Member Kushal Join Date: Mar 2016 Location: INDIA Posts: 4 Rep Power: 10	Thank you very much Nader for Quick reply. As you said I went back to CAD model and made the geometry in a single huge part. Now I am not getting any error with a very fine mesh.

March 15, 2016, 15:38		#4
bboynido New Member Nader Khattabi Join Date: Mar 2016 Location: Tunisia Posts: 23 Rep Power: 10	You're welcome anytime, glad that it works now