[ICEM] ICEM CFD and Gambit (CGNS)

AshwaniAssam · February 17, 2016, 04:08

Dear all,

We are having a in-house solver with capabilities to read CGNS unstructured mesh. Now, a strange problem we are facing. The CGNS made by Gambit, when used in the solver, gives the output CGNS file with data on the boundary parts. But the CGNS made using ICEM, read well in the solver, but the output CGNS file has no boundary data, or face. (The solver is the same in both case.)

CGNS version used: 2.4 or less.
Mesh in ICEM made using blocking which is later converted to unstructured mesh.

Can anyone help, do I need to change some settings in ICEM to get through this problem?

Thank You!

with regards
Ashwani

AshwaniAssam · February 17, 2016, 07:04

A possible problem which while analyzing the the two CGNS file (from Gambit and icem-cfd) we came across is shown in figure attach below. The CGNS-viewer shows in data description no. of dimension as 6 for icem while 4 for gambit. 4 seems more reasonable for boundary mesh elements. Also, for other boundary patches from icem this value (here, 6) is not consistent, while all boundary patches in Gambit has 4 as dimension.

February 17, 2016, 04:08	ICEM CFD and Gambit (CGNS)	#1
AshwaniAssam Senior Member Ashwani Join Date: Sep 2013 Location: Hyderabad Posts: 154 Rep Power: 13	Dear all, We are having a in-house solver with capabilities to read CGNS unstructured mesh. Now, a strange problem we are facing. The CGNS made by Gambit, when used in the solver, gives the output CGNS file with data on the boundary parts. But the CGNS made using ICEM, read well in the solver, but the output CGNS file has no boundary data, or face. (The solver is the same in both case.) CGNS version used: 2.4 or less. Mesh in ICEM made using blocking which is later converted to unstructured mesh. Can anyone help, do I need to change some settings in ICEM to get through this problem? Thank You! with regards Ashwani

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[ICEM] Different meshes from ICEM and GAMBIT	Mojtaba.a	ANSYS Meshing & Geometry	9	March 30, 2013 03:42
[ICEM] Function in Gambit, but hidden in ICEM CFD	matteogir	ANSYS Meshing & Geometry	3	January 26, 2012 12:15
Gambit mesh file import into ICEM CFD	dev....	FLUENT	2	January 29, 2009 11:37
ANSYS ICEM CFD Mesh to Gambit	Simon Bergström	FLUENT	0	January 19, 2007 12:53
Gambit or ICEM CFD	Alan	FLUENT	7	January 10, 2006 10:03