 |
 |
 |
|
|
|
[Sponsors] | ||||
[ANSYS Meshing] Mesh connection inflation layer with mesh in channel |
 |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
February 6, 2015, 08:46
|
Mesh connection inflation layer with mesh in channel
|
#1 |
|
New Member
Join Date: Feb 2015
Posts: 1
Rep Power: 0  |
Dear Community,
I have a problem with the mesh generation in ANSYS Mesh for CFX. There is fluid volume (the grey and green bodies) that is divided by a solid volume (the brown body). I need inflation layers to resolve the boundary layer in the grey body (a narrow channel) Screenshot forum.jpgand this inflation layers should become connected with the mesh of the green body (which should be appropriatly fine). How can I reach this? I already tried inflation layers, and Multi Body Methos with fine prism on the green body, but Mesher doesn´t connect the two fluid bodies reasonable. Is therea a way to do this with Mesher, or do I have to use ICEM for this problem? Thank you for replies! Cheers Lukas |
|
|
|
|
|
| Tags |
| connection, inflation layer, mesh 3d |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| [snappyHexMesh] Number of cells in mesh don't match with size of cellLevel | colinB | OpenFOAM Meshing & Mesh Conversion | 14 | December 12, 2018 09:07 |
| [snappyHexMesh] Unwanted mesh created by snappyHexMesh--baffle | bieshuxuhe | OpenFOAM Meshing & Mesh Conversion | 2 | April 23, 2014 02:59 |
| [snappyHexMesh] Layers:problem with curvature | giulio.topazio | OpenFOAM Meshing & Mesh Conversion | 10 | August 22, 2012 10:03 |
| [snappyHexMesh] Layers don't fully surround surface | EVBUCF | OpenFOAM Meshing & Mesh Conversion | 14 | August 20, 2012 05:31 |
| [snappyHexMesh] Boundary layer generation problems | ivan_cozza | OpenFOAM Meshing & Mesh Conversion | 0 | October 6, 2010 14:47 |
Linear Mode
