Gambit meshing problem to following geometry

ahmadmln · September 13, 2014, 22:46

hi everyone, i'm having trouble meshing this geometry(picture attached). It is a part of a bigger geometry that i've divided into a several volumes.

In this volume, I've already mesh some faces and some edges. the meshing on the left side and upper side is from another volume. The face meshing on the back side, the obstruction inside the volume, and the edge meshing on the right side is my effort to create a structured volume mesh.

however, when i tried to mesh volume. An error message appeared : unexpected problems during submapping of volume 207.

Please, can anyone help me?

-mAx- · October 21, 2014, 02:36

maybe is your volume 207 not suitable for hexa meshing.
I would try to copy this volume somewhere, and mesh it on the fly.
If you cannot, then it is not suitable for hexa meshing, and you need to split it
(I move your thread in the right subforum)

ahmadmln · October 21, 2014, 02:49

thanks for the reply

i have already succeded in meshing the volume. apparently, the volume need to be divided more so it can be meshed.

October 21, 2014, 02:36		#2
-mAx- Super Moderator Maxime Perelli Join Date: Mar 2009 Location: Switzerland Posts: 3,297 Rep Power: 41	maybe is your volume 207 not suitable for hexa meshing. I would try to copy this volume somewhere, and mesh it on the fly. If you cannot, then it is not suitable for hexa meshing, and you need to split it (I move your thread in the right subforum) __________________ In memory of my friend Hervé: CFD engineer & freerider

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[ANSYS Meshing] Problem with meshing a complex Geometry (Hex)	fluent_beiyo	ANSYS Meshing & Geometry	8	April 26, 2014 05:55
Make geometry in Solidworks, meshing in Gambit	Dziyad	FLUENT	0	January 19, 2014 03:50
[GAMBIT] meshing in GAMBIT, a flow through a pipe having complex inflow geometry	mazhar1613	ANSYS Meshing & Geometry	1	January 12, 2012 00:18
Gambit - meshing over airfoil wrapping (?) problem	JFDC	FLUENT	1	July 11, 2011 06:59
Problem meshing with Gambit	Adrian	FLUENT	8	October 7, 2008 09:39

October 21, 2014, 02:49		#3
ahmadmln New Member Ahmad Maulana Join Date: Sep 2014 Posts: 2 Rep Power: 0	thanks for the reply i have already succeded in meshing the volume. apparently, the volume need to be divided more so it can be meshed.