[ANSYS Meshing] 2D mesh from a 3D geometry results in 1m thick mesh

herrolsen · June 20, 2014, 07:02

Hi everyone!
I have a weird problem that I can't seem to figure out.

Here's my problem;
I have a 3D geometry that I import to Modeler, then I make a 2D surface in the XY plane and use boolean; cut material, use the 3D model as tool and select preserve bodies to NO. I then end up with one surface with zero thickness. So far so good. I then make a sketch of an area where I want a higher density of cells, and imprint this sketch on the 2D surface.

The problem arises when I want to start meshing.
When I generate the mesh I end up with a mesh that has 1m thickness and one cell in z-direction. Has anyone experienced this before?

Does anyone have an idea on how to solve it?

Cheers
Kristian

herrolsen · June 27, 2014, 07:03

Changed thickness to 0m in Ansys meshing - model - geometry - surface body - definition - thickness - 0m.
Seems to be working!

celera · March 26, 2019, 16:00

Hello herrolsen, is your analysis in 3d or 2D?

June 20, 2014, 07:02	2D mesh from a 3D geometry results in 1m thick mesh	#1
herrolsen New Member Join Date: Jun 2014 Posts: 29 Rep Power: 12	Hi everyone! I have a weird problem that I can't seem to figure out. Here's my problem; I have a 3D geometry that I import to Modeler, then I make a 2D surface in the XY plane and use boolean; cut material, use the 3D model as tool and select preserve bodies to NO. I then end up with one surface with zero thickness. So far so good. I then make a sketch of an area where I want a higher density of cells, and imprint this sketch on the 2D surface. The problem arises when I want to start meshing. When I generate the mesh I end up with a mesh that has 1m thickness and one cell in z-direction. Has anyone experienced this before? Does anyone have an idea on how to solve it? Cheers Kristian

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
sliding mesh problem in CFX	Saima	CFX	46	September 11, 2021 08:38
[ANSYS Meshing] "The mesh file exporter does not support overlapping geometry in named selections"	blacksoil2012	ANSYS Meshing & Geometry	4	October 30, 2015 11:27
Mesh, Solutions, Model, results	doneatlast	FLUENT	0	March 12, 2014 17:18
Mesh for 3 dim Geometry	Phil	FLUENT	9	July 12, 2000 05:39
unstructured vs. structured grids	Frank Muldoon	Main CFD Forum	1	January 5, 1999 11:09

June 27, 2014, 07:03		#2
herrolsen New Member Join Date: Jun 2014 Posts: 29 Rep Power: 12	Changed thickness to 0m in Ansys meshing - model - geometry - surface body - definition - thickness - 0m. Seems to be working!

March 26, 2019, 16:00		#3
celera New Member Dave Join Date: Feb 2017 Posts: 1 Rep Power: 0	Hello herrolsen, is your analysis in 3d or 2D?