[ICEM] ICEM CFD inflation (prim mesh) problem -- CFD Online Discussion Forums

April 17, 2014, 02:29

ICEM CFD inflation (prim mesh) problem

erzdemir

New Member

erdal

Join Date: Apr 2014

Posts: 22

Rep Power: 12

Hello,

I have this geometry as i attached and trying to make inflation layer in light green area (inner part) but i received error as in attached file. What could be the reason?

Attached Images

	1.jpg (97.4 KB, 24 views)
	2.png (3.1 KB, 15 views)

April 17, 2014, 03:45		#2
Studi New Member Join Date: Sep 2012 Location: Germany Posts: 25 Rep Power: 14	Hi! Go to Mesh > Global Mesh Parameters > Prism Meshing Parameters. In the 'Prism element part controls' section make sure you assigned a body in 'New volume part'. If you have already, assign your desired part again. It should work then. Sebastian

April 17, 2014, 04:05		#3
erzdemir New Member erdal Join Date: Apr 2014 Posts: 22 Rep Power: 12	I did it already.

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[ICEM] surface mesh merging problem	everest	ANSYS Meshing & Geometry	44	April 14, 2016 07:41
ICEM CFD Prism Mesh Generation Problem with Ansys 12.0 & windows 7 OS	kh_thakor	ANSYS Meshing & Geometry	1	February 1, 2011 21:22
ICEM 12 CFD help creating volume mesh from stl	EmpError	ANSYS	0	November 13, 2010 07:38
----------------2D mesh with ICEM CFD	Abir	FLUENT	2	September 13, 2008 00:55
ICEM CFD 5.0 - CFX mesh problem	NeedHelp	CFX	2	January 4, 2005 14:45

All times are GMT -4. The time now is 18:24.