[ICEM] [ICEM] I need to mesh combustion chamber geometry

sabba · February 24, 2014, 09:49

Dear friends
anybody can help me to meshing this model of combustion chamber ?
thanks.

sabba · February 24, 2014, 09:54

combustion chamber in attached file

Far · February 24, 2014, 10:27

set the appropriate sizes and compute the mesh.

sabba · February 24, 2014, 11:27

Dear Mr Far
my problem is in the mesh, i can't do a structural mesh.
http://www.4shared.com/web/preview/doc/alSBXQAPce

Far · February 24, 2014, 11:41

you are using blocking method? If yes what problem you are facing?

sabba · February 24, 2014, 14:20

yes I' m working with blocking method.
the problem is the bad and deformation of mesh in the axe.

sabba · February 25, 2014, 10:05

yes I' m working with blocking method.
the problem is the bad and deformation of mesh in the axe.

sabba · February 26, 2014, 17:47

Where are you, friends? you can help me ?

Far · February 26, 2014, 19:35

You have done blocking and i can see the premesh. Where is the problem is? can you show some pics?

sabba · February 28, 2014, 13:41

hi MR.Far
this is my geometry.

http://www.4shared.com/file/RnrjE1juce/Geom.html

can i use the blocking method for it or no?

Far · February 28, 2014, 14:11

Quote:

Originally Posted by sabba

hi MR.Far
this is my geometry.

http://www.4shared.com/file/RnrjE1juce/Geom.html

can i use the blocking method for it or no?

it is simple geometry and can be done very easily with blocking

sabba · February 28, 2014, 17:50

Far · March 1, 2014, 01:01

I dont see any blocking there.

sabba · March 1, 2014, 05:04

Please see this file:

http://www.4shared.com/rar/G7gWZoEPb...t_1_files.html

And you'll find the division of blocks accomplished.

February 24, 2014, 09:49	[ICEM] I need to mesh combustion chamber geometry	#1
sabba New Member samir Join Date: Jul 2009 Posts: 23 Rep Power: 17	Dear friends anybody can help me to meshing this model of combustion chamber ? thanks.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[ICEM] Negative volume error in hybrid mesh	siw	ANSYS Meshing & Geometry	4	September 3, 2014 06:25
nozzle/swirler geometry combustion chamber modeling	magnusDux85	CFX	7	August 13, 2013 08:25
[Gmsh] 2D Mesh Generation Tutorial for GMSH	aeroslacker	OpenFOAM Meshing & Mesh Conversion	12	January 19, 2012 04:52
fluent add additional zones for the mesh file	SSL	FLUENT	2	January 26, 2008 12:55
unstructured vs. structured grids	Frank Muldoon	Main CFD Forum	1	January 5, 1999 11:09

February 24, 2014, 10:27		#3
Far Senior Member Sijal Join Date: Mar 2009 Location: Islamabad Posts: 4,558 Blog Entries: 6 Rep Power: 54	set the appropriate sizes and compute the mesh.

February 24, 2014, 11:27		#4
sabba New Member samir Join Date: Jul 2009 Posts: 23 Rep Power: 17	Dear Mr Far my problem is in the mesh, i can't do a structural mesh. http://www.4shared.com/web/preview/doc/alSBXQAPce

February 24, 2014, 11:41		#5
Far Senior Member Sijal Join Date: Mar 2009 Location: Islamabad Posts: 4,558 Blog Entries: 6 Rep Power: 54	you are using blocking method? If yes what problem you are facing?

February 24, 2014, 14:20		#6
sabba New Member samir Join Date: Jul 2009 Posts: 23 Rep Power: 17	yes I' m working with blocking method. the problem is the bad and deformation of mesh in the axe.

February 25, 2014, 10:05		#7
sabba New Member samir Join Date: Jul 2009 Posts: 23 Rep Power: 17	yes I' m working with blocking method. the problem is the bad and deformation of mesh in the axe.

February 26, 2014, 17:47		#8
sabba New Member samir Join Date: Jul 2009 Posts: 23 Rep Power: 17	Where are you, friends? you can help me ?

February 26, 2014, 19:35		#9
Far Senior Member Sijal Join Date: Mar 2009 Location: Islamabad Posts: 4,558 Blog Entries: 6 Rep Power: 54	You have done blocking and i can see the premesh. Where is the problem is? can you show some pics?

February 28, 2014, 13:41		#10
sabba New Member samir Join Date: Jul 2009 Posts: 23 Rep Power: 17	hi MR.Far this is my geometry. http://www.4shared.com/file/RnrjE1juce/Geom.html can i use the blocking method for it or no?

February 28, 2014, 17:50		#12
sabba New Member samir Join Date: Jul 2009 Posts: 23 Rep Power: 17	Is this a good blocking Mr Far? http://www.4shared.com/file/je96wfes..._stratigy.html

March 1, 2014, 01:01		#13
Far Senior Member Sijal Join Date: Mar 2009 Location: Islamabad Posts: 4,558 Blog Entries: 6 Rep Power: 54	I dont see any blocking there.

March 1, 2014, 05:04		#14
sabba New Member samir Join Date: Jul 2009 Posts: 23 Rep Power: 17	Please see this file: http://www.4shared.com/rar/G7gWZoEPb...t_1_files.html And you'll find the division of blocks accomplished.