Home > Forums > Software User Forums > ANSYS > ANSYS Meshing & Geometry

[DesignModeler] Problem to separate a face from a body

Updated Threads

Reply

Search this Thread

September 3, 2013, 16:45	Problem to separate a face from a body	#1
johnny22 New Member João Vitor Marques Join Date: Sep 2013 Posts: 2 Rep Power: 0	I need to name two different surfaces on a cube's face. One surface is the hole and the other is the cube's face minus the hole. I'm new with DesigModeler. I 've tried a lot of things unsuccessfully. Please helpme guys. Last edited by johnny22; September 4, 2013 at 10:40.

September 4, 2013, 10:41		#2
johnny22 New Member João Vitor Marques Join Date: Sep 2013 Posts: 2 Rep Power: 0	Come on guys! Any ideas? ... I know it's a newbie problem but i can't really solve it ...

Reply

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[mesh manipulation] Duplicate point found in cut face - stitchMesh - problem	RugbyGandalf	OpenFOAM Meshing & Mesh Conversion	5	April 2, 2020 15:45
convergence problem / bluff body / k omega	LM4112	OpenFOAM Pre-Processing	3	June 16, 2013 07:28
[ICEM] Identical unstructued Face mesh for two separate faces	Mojtaba.a	ANSYS Meshing & Geometry	3	May 1, 2013 03:27
channelFoam for a 3D pipe	AlmostSurelyRob	OpenFOAM	3	June 24, 2011 14:06
fluent add additional zones for the mesh file	SSL	FLUENT	2	January 26, 2008 12:55

All times are GMT -4. The time now is 02:51.