[ICEM] merging hexa meshes

feizaghaee · June 22, 2013, 18:33

hi all. I'm trying to mesh a channel by blocking. this channel contains two regions. when I mesh these two parts by blocking and try to merge them ICEM says that:
only 2 regions can be merged
currently there > 3 regions
I attached a pic. I accurately specify the size of mesh on the interface.
please help me!

FJSJ · June 23, 2013, 08:23

Hi,

ICEM can´t merge hexa/hexa mesh, at least, one of these mesh has to be tetra/tri mesh. Anyway, why don´t you try to do all of this with a blocking?

nitinbansal184 · June 24, 2013, 08:55

last time i am able to achieve minimum mesh quality of 0.5....try simple blocking...it's not difficult

feizaghaee · June 24, 2013, 16:56

thanks a lot.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[ICEM] merge meshes between hexa and prism	jjz2013	ANSYS Meshing & Geometry	39	February 12, 2019 11:38
[ANSYS Meshing] Workbench 13: Structured Hexa Meshes	rooftop	ANSYS Meshing & Geometry	19	March 31, 2016 03:33
[ICEM] Merging Hexa Meshes in ICEM	screech1987	ANSYS Meshing & Geometry	11	March 13, 2014 12:45
[ICEM] merge two hexa meshes	gajemon	ANSYS Meshing & Geometry	1	January 29, 2011 20:49
Merging Meshes	Matteo Giacobello.	FLUENT	1	February 16, 2000 10:22

June 23, 2013, 08:23		#2
FJSJ Senior Member Javi Join Date: Jan 2013 Posts: 276 Rep Power: 16	Hi, ICEM can´t merge hexa/hexa mesh, at least, one of these mesh has to be tetra/tri mesh. Anyway, why don´t you try to do all of this with a blocking?

June 24, 2013, 08:55		#3
nitinbansal184 New Member nitin bansal Join Date: Jun 2012 Location: INDIA Posts: 27 Rep Power: 14	last time i am able to achieve minimum mesh quality of 0.5....try simple blocking...it's not difficult

June 24, 2013, 16:56		#4
feizaghaee Senior Member moein Join Date: Dec 2009 Posts: 132 Rep Power: 16	thanks a lot.