[ICEM] Scrambled data in exported Fluent mesh from ICEM CFD

bjnieuwboer · May 6, 2013, 10:25

Hi All,

I'm trying to create my first model for OPENFOAM using ICEM CFD 13.0 as meshing software. I've created a rectangular box and created a 20 by 20 mesh inside. I've exported this mesh as a Fluent-mesh using the steps described in http://www.cfd-online.com/Forums/ans...port-mesh.html by dhananjay1287. In a later stage I can convert this to a OPENFOAM-mesh. However, the msh-file shows 20 time the same point and then shows 20 times another point. This gives off course an error in OPENFOAM.

I've attached my folder of the whole ICEM project, including the uns-file and the msh-file. Is there someone that knows what I did wrong. Or is it a bug in ICEM CFD?

bjnieuwboer · October 18, 2013, 07:56

After a while I took another approach. This mesh was a 2D mesh and saved as such in the Fluent exporter of ICEM. A 3D mesh was exported correctly to a fluent mesh and imported correctly into OpenFoam.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[Commercial meshers] Mesh conversion problem (fluent3DMeshToFoam)	Aadhavan	OpenFOAM Meshing & Mesh Conversion	2	March 8, 2018 02:47
FLUENT - ICEM / Segmentation Violation Error (Hybrid Mesh)	Joachim	ANSYS	3	April 24, 2016 17:52
Transport mesh from ICEM CFD, to Fluent, to Sysnoise	Wieland	FLUENT	2	April 15, 2012 07:28
Export 2D mesh from ICEM to Fluent	BuilttoSpill	ANSYS Meshing & Geometry	4	August 28, 2010 09:16
Mesh from ICEM CFD to CFX ! Error ! Why ? Thanks !	Vu Trinh Tuan	CFX	11	March 28, 2005 20:04

October 18, 2013, 07:56		#2
bjnieuwboer Member Bas Nieuwboer Join Date: Mar 2013 Posts: 34 Rep Power: 13	After a while I took another approach. This mesh was a 2D mesh and saved as such in the Fluent exporter of ICEM. A 3D mesh was exported correctly to a fluent mesh and imported correctly into OpenFoam.