[ICEM] Import IGES file from CATIA to ICEM CFD 13.0

Prince@NTUA · March 23, 2013, 16:07

Hello All,

I have designed a very simple line sketch in CATIA v5, (it looks like a bullet - axis-symmetric) and I want to import it as IGES to ICEM - CFD (that;s the file format I have in mind). I want to proceed with a C-Mesh creation. I make the block and associate the edges of the block with the curves of the outer domain. When I have to arrange the mesh properties (max size) of Farfield , outflow and sketch, the mesh is not created. I have found out that it has to do with the IGES input geometry.

Is there any procedure that should I follow at the very beginning when I import the IGES file to ICEM CFD??

Thanks in advance.

Dimitris

jthiakz · March 23, 2013, 17:57

better save your CATIAV5 model into CATIA V4 **.model instead of IGES. then import the same CATIA V4 model in ICEM CFD.while importing check the option to keep the sketch points & curves with surfaces if u have any.
# After blocking
# chk block quality, then convert that into mesh.

Prince@NTUA · March 23, 2013, 18:22

thank you so much. It really worked !!

March 23, 2013, 16:07	Import IGES file from CATIA to ICEM CFD 13.0	#1
Prince@NTUA New Member Dimitris Gouskos Join Date: Mar 2013 Posts: 2 Rep Power: 0	Hello All, I have designed a very simple line sketch in CATIA v5, (it looks like a bullet - axis-symmetric) and I want to import it as IGES to ICEM - CFD (that;s the file format I have in mind). I want to proceed with a C-Mesh creation. I make the block and associate the edges of the block with the curves of the outer domain. When I have to arrange the mesh properties (max size) of Farfield , outflow and sketch, the mesh is not created. I have found out that it has to do with the IGES input geometry. Is there any procedure that should I follow at the very beginning when I import the IGES file to ICEM CFD?? Thanks in advance. Dimitris

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[swak4Foam] swak4Foam-groovyBC build problem	zxj160	OpenFOAM Community Contributions	18	July 30, 2013 14:14
friction forces icoFoam	ofslcm	OpenFOAM	3	April 7, 2012 11:57
"parabolicVelocity" in OpenFoam 2.1.0 ?	sawyer86	OpenFOAM Running, Solving & CFD	21	February 7, 2012 12:44
pisoFoam compiling error with OF 1.7.1 on MAC OSX	Greg Givogue	OpenFOAM Programming & Development	3	March 4, 2011 18:18
error while compiling the USER Sub routine	CFD user	CFX	3	November 25, 2002 16:16

March 23, 2013, 17:57		#2
jthiakz Member Thiagu Join Date: Oct 2012 Location: India Posts: 60 Rep Power: 14	better save your CATIAV5 model into CATIA V4 **.model instead of IGES. then import the same CATIA V4 model in ICEM CFD.while importing check the option to keep the sketch points & curves with surfaces if u have any. # After blocking # chk block quality, then convert that into mesh.

March 23, 2013, 18:22		#3
Prince@NTUA New Member Dimitris Gouskos Join Date: Mar 2013 Posts: 2 Rep Power: 0	thank you so much. It really worked !!