[ICEM] ICEM Hexa Meshing Butterfly Valve (Structured)

snpradeep · November 23, 2012, 06:43

Hello..Can anyone help me with meshing a butterfly valve..I want knnow how can I block the geometry in ICEM to get good angles..(Atleast 20 deg)..In current blocking i am getting 1 deg..I am not understanding how to improve it..Please find the enclosed pictures of the same..Awaiting for your suggestions..
Regards,
Pradeep

siw · November 23, 2012, 07:32

Maybe this topic could help (http://www.cfd-online.com/Forums/ans...fly-valve.html).

Far · November 23, 2012, 09:58

Will same blocking strategy be used for the all opening settings?

Because the full opening case is very simple to block.

snpradeep · November 23, 2012, 10:26

Quote:

Originally Posted by Far

Will same blocking strategy be used for the all opening settings?

Because the full opening case is very simple to block.

Dear Mr. Far,

The valve is always open in my case...

Regards,
Pradeep

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[ICEM] Structured Hexa Mesh on Wing	cfd seeker	ANSYS Meshing & Geometry	77	July 12, 2017 23:52
[ICEM] ICEM Hexa meshing tutorial - Wing with sharp trailing edge	Far	ANSYS Meshing & Geometry	0	May 18, 2012 15:20
ICEM Hexa meshing tutorial - Wing with sharp trailing edge	Far	ANSYS	1	May 18, 2012 15:19
Hexa + Tetra meshing (Hybrid) in ICEM	vmlxb6	ANSYS Meshing & Geometry	12	December 27, 2010 11:18
ICEM Meshing	Jaloha	CFX	0	April 1, 2008 07:24

November 23, 2012, 07:32		#2
siw Senior Member Stuart Join Date: Jul 2009 Location: Portsmouth, England Posts: 739 Rep Power: 26	Maybe this topic could help (http://www.cfd-online.com/Forums/ans...fly-valve.html).

November 23, 2012, 09:58		#3
Far Senior Member Sijal Join Date: Mar 2009 Location: Islamabad Posts: 4,558 Blog Entries: 6 Rep Power: 54	Will same blocking strategy be used for the all opening settings? Because the full opening case is very simple to block.