[ANSYS Meshing] Importing a GAMBIT mesh file to Ansys 13

yahya · October 29, 2012, 21:35

I have a GAMBIT mesh file for a complicated geometry, how I can import this GAMBIT file to Ansys 13 i.e. ANSYS meshing application and then edit and modify it?

diamondx · October 29, 2012, 22:54

i had never used gambit. i do know that gambit is used to make mesh for fluent.
make your mesh for fluent. then import the msh file in icem. you can even import the case fluent file in icem. i don't know what kind modification you will bring to your case, as you can be very limited... hope i could help

October 29, 2012, 21:35	Importing a GAMBIT mesh file to Ansys 13	#1
yahya Member yahya Join Date: Jul 2012 Posts: 43 Rep Power: 14	I have a GAMBIT mesh file for a complicated geometry, how I can import this GAMBIT file to Ansys 13 i.e. ANSYS meshing application and then edit and modify it?

October 29, 2012, 22:54		#2
diamondx Super Moderator Ghazlani M. Ali Join Date: May 2011 Location: Tokyo, Japan Posts: 1,385 Blog Entries: 23 Rep Power: 29	i had never used gambit. i do know that gambit is used to make mesh for fluent. make your mesh for fluent. then import the msh file in icem. you can even import the case fluent file in icem. i don't know what kind modification you will bring to your case, as you can be very limited... hope i could help __________________ Regards, New to ICEM CFD, try this document --> https://goo.gl/KAOIwm Ali

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[Other] mesh airfoil NACA0012	anand_30	OpenFOAM Meshing & Mesh Conversion	13	March 7, 2022 18:22
[swak4Foam] swak4foam building problem	GGerber	OpenFOAM Community Contributions	54	April 24, 2015 17:02
importing mesh from Gambit and other software to ansys workbench	mortazavi	CFX	12	May 30, 2012 08:38
[blockMesh] error message with modeling a cube with a hold at the center	hsingtzu	OpenFOAM Meshing & Mesh Conversion	2	March 14, 2012 10:56
Importing mesh files from Ansys into Gambit	Srinivas	FLUENT	2	August 6, 2002 11:02