[ANSYS Meshing] problem in HEX-tet mesh generation in ICEM

himanshu28 · October 28, 2012, 05:28

hi,
thank you i have generated the hex mesh...and transferred it to CFX ...I also need a tutorial for ICEM ???

Far · October 28, 2012, 05:31

No.

For CFD only first option. Second option is for FEA as ICEM is also capable to output mesh structural solver.

himanshu28 · October 28, 2012, 07:21

Hi sir,
i have imported the geometry in the CFX model but he transition curves are not coming in the mesh as in the solution also it is not taking the transition region. please help me out i have attached a .jpeg

cfx_import problem.JPG

Far · October 28, 2012, 09:12

what do mean by transition region? It is also graphic issue, but if there is some geometric feature(s) which is not present in the CFX-Pre case then we have solution in ICEM.

himanshu28 · October 28, 2012, 12:17

hi,
yes u are right it is a graphic issue only it seems ..and after running the complete solver if i visualize the cut plane i am obtaining the results ....of my interest .. actually this a problem of air flowing through the changing cross-section duct as u can see from the image so i am was talking about the transition from circular to that of the rectangular region. thanx for ur help ....i have attached some of my results....

October 28, 2012, 05:28		#21
himanshu28 Senior Member Himanshu Sharma Join Date: Jul 2012 Posts: 101 Rep Power: 14	hi, thank you i have generated the hex mesh...and transferred it to CFX ...I also need a tutorial for ICEM ??? Last edited by himanshu28; October 28, 2012 at 05:56.

October 28, 2012, 07:21	problem in CFX	#23
himanshu28 Senior Member Himanshu Sharma Join Date: Jul 2012 Posts: 101 Rep Power: 14	Hi sir, i have imported the geometry in the CFX model but he transition curves are not coming in the mesh as in the solution also it is not taking the transition region. please help me out i have attached a .jpegcfx_import problem.JPG

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[ICEM] hybrid mesh/Aligning tet with hex mesh	shridharsn	ANSYS Meshing & Geometry	0	October 17, 2012 12:29
[blockMesh] Blockmesh error - 2D scramjet	ishaninair	OpenFOAM Meshing & Mesh Conversion	7	March 18, 2011 01:14
ICEM CFD Prism Mesh Generation Problem with Ansys 12.0 & windows 7 OS	kh_thakor	ANSYS Meshing & Geometry	1	February 1, 2011 21:22
Latest News in Mesh Generation	Robert Schneiders	Main CFD Forum	1	February 18, 2000 01:48
Latest news in mesh generation	Robert Schneiders	Main CFD Forum	0	March 2, 1999 05:07

October 28, 2012, 05:31		#22
Far Senior Member Sijal Join Date: Mar 2009 Location: Islamabad Posts: 4,558 Blog Entries: 6 Rep Power: 54	No. For CFD only first option. Second option is for FEA as ICEM is also capable to output mesh structural solver.

October 28, 2012, 09:12		#24
Far Senior Member Sijal Join Date: Mar 2009 Location: Islamabad Posts: 4,558 Blog Entries: 6 Rep Power: 54	what do mean by transition region? It is also graphic issue, but if there is some geometric feature(s) which is not present in the CFX-Pre case then we have solution in ICEM.