[ICEM] batch processing of ICEM

yuanmengyuan1989 · September 18, 2012, 05:11

When I am dealing with the batch processing of ICEM, it always arises an error ,as the following text.
Error:
Running FLUENT V6 interface vers. 12.0.1
error opening file E:/2/case.uns:No such file or directory df_open :: No such file or directory

I open the ICEM and input the model (.tin), then input the replay file, it will start to work. But when it output the mesh(.mesh), it will appear the error. The operation above are done automatically by the order system("\"C:\\Program Files\\ANSYS Inc\\v130\\icemcfd\\win\\bin\\icemcfd.bat\" E:\\3\\sv.tin E:\\2\\sv.rpl");

But when I operate it by hand, it has no error.
I am eager to know why it emerge and look forward to your help.
Thanks!

PSYMN · September 19, 2012, 12:15

Sorry, I am not sure what the problem is. My first guess would be permissions... Maybe you have admin permissions when you run interactive, but your batch process doesn't have write permissions so the uns file isn't there when the conversion to fluent begins?

This is the sort of thing best handled by tech support... Email your question to "techsupp@ansys.com", or log it in via the customer portal (faster).

yuanmengyuan1989 · September 19, 2012, 22:07

Thanks for your replay and your advise! I will check my permission and try to send an email to ask for the tech support, thank you very much!

September 18, 2012, 05:11	[ICEM] batch processing of ICEM	#1
yuanmengyuan1989 New Member Join Date: Jul 2012 Posts: 25 Rep Power: 14	When I am dealing with the batch processing of ICEM, it always arises an error ,as the following text. Error: Running FLUENT V6 interface vers. 12.0.1 error opening file E:/2/case.uns:No such file or directory df_open :: No such file or directory I open the ICEM and input the model (.tin), then input the replay file, it will start to work. But when it output the mesh(.mesh), it will appear the error. The operation above are done automatically by the order system("\"C:\\Program Files\\ANSYS Inc\\v130\\icemcfd\\win\\bin\\icemcfd.bat\" E:\\3\\sv.tin E:\\2\\sv.rpl"); But when I operate it by hand, it has no error. I am eager to know why it emerge and look forward to your help. Thanks!

September 19, 2012, 12:15		#2
PSYMN Senior Member Simon Pereira Join Date: Mar 2009 Location: Ann Arbor, MI Posts: 2,663 Blog Entries: 1 Rep Power: 47	Sorry, I am not sure what the problem is. My first guess would be permissions... Maybe you have admin permissions when you run interactive, but your batch process doesn't have write permissions so the uns file isn't there when the conversion to fluent begins? This is the sort of thing best handled by tech support... Email your question to "techsupp@ansys.com", or log it in via the customer portal (faster). __________________ ----------------------------------------- Please help guide development at ANSYS by filling in these surveys Public ANSYS ICEM CFD Users Survey This second one is more general (Gambit, TGrid and ANSYS Meshing users welcome)... CFD Online Users Survey

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Save images using Fluent in batch processing mode	dixitked	FLUENT	8	August 29, 2019 13:25
[ICEM] ICEM 14 Batch Refinement Tool	Far	ANSYS Meshing & Geometry	13	January 27, 2013 23:45
[General] [Paraview] Batch processing and screenshots saves.	el douco	ParaView	0	April 9, 2008 04:37
Batch Processing and auto-save option	Vimal	FLUENT	4	May 17, 2006 15:07
Help: Batch file for Parallel Processing ( 2CPU )	SC	FLUENT	1	July 15, 2003 22:34

September 19, 2012, 22:07		#3
yuanmengyuan1989 New Member Join Date: Jul 2012 Posts: 25 Rep Power: 14	Thanks for your replay and your advise! I will check my permission and try to send an email to ask for the tech support, thank you very much!