Problem about ZoneCut mesh in ANSA

gensco · April 29, 2020, 06:05

Hi everyone,

I am meshing a flat plate in a flow with ANSA and I am trying to generate the BL mesh using ZoneCut function. I have first generated a tria mesh in the macro near the plate, then I activated zonecut with quad elements, but the result is the one in Fig3: the zonecut makes TRIA elements anyway. Does anyone knows why this happens? I really changed every possible setting in mesh parameters. Thank you in advance!

Fig2.jpg

Fig1.jpg

Fig3.jpg

hobing · February 10, 2021, 04:13

did you solve the problem?

April 29, 2020, 06:05	ZoneCut mesh in ANSA	#1
gensco New Member Genn Join Date: Mar 2020 Posts: 1 Rep Power: 0	Hi everyone, I am meshing a flat plate in a flow with ANSA and I am trying to generate the BL mesh using ZoneCut function. I have first generated a tria mesh in the macro near the plate, then I activated zonecut with quad elements, but the result is the one in Fig3: the zonecut makes TRIA elements anyway. Does anyone knows why this happens? I really changed every possible setting in mesh parameters. Thank you in advance! Fig2.jpg Fig1.jpg Fig3.jpg Last edited by gensco; May 4, 2020 at 09:49.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[snappyHexMesh] snappyHexMesh does not create any mesh except one for the reference cell	Arman_N	OpenFOAM Meshing & Mesh Conversion	1	May 20, 2019 18:16
[Other] Mesh Importing Problem	cuteapathy	ANSYS Meshing & Geometry	2	June 24, 2017 06:29
Mesh is doing some problem	prwl120	FLUENT	2	May 21, 2015 15:05
Moving mesh	Niklas Wikstrom (Wikstrom)	OpenFOAM Running, Solving & CFD	122	June 15, 2014 07:20
[snappyHexMesh] external flow with snappyHexMesh	chelvistero	OpenFOAM Meshing & Mesh Conversion	11	January 15, 2010 20:43

February 10, 2021, 04:13		#2
hobing New Member HOJUN YU Join Date: Jul 2020 Posts: 24 Rep Power: 6	did you solve the problem?