part remesh for optimization

Marien · May 8, 2017, 07:08

Hi everyone

I've done in CATIA a parametric CAD, which is divided in 2 part (the parts are welded): 1 is fixed and the other part change through the parameters.

I have to do a CFD optimization process, so i want that each time i change my configuration through the parameter in CATIA, when I load the file for the mesh, ANSA hold the old mesh for the fixed part but do a mesh only for the part that is changed, reducing mesh time.

If the answer is complex, plese tell me wich part of the user manual I have to study.

Thank you

dmirel · May 9, 2017, 03:08

Hello Marien,

You can keep your old mesh if is on the geometry by freezeing it. Under Mesh deck in ANSA Macros->Freeze/Unfreeze. But this operation can be done only if the old mesh is not released from the surface.
If this is not a helpful answer maybe you can detail your process and maybe I can help you with other advices if I understand better what you want to do, maybe some screenshots.

Have fun.

May 8, 2017, 07:08	part remesh for optimization	#1
Marien New Member Fabio Mariano Join Date: Apr 2017 Posts: 7 Rep Power: 9	Hi everyone I've done in CATIA a parametric CAD, which is divided in 2 part (the parts are welded): 1 is fixed and the other part change through the parameters. I have to do a CFD optimization process, so i want that each time i change my configuration through the parameter in CATIA, when I load the file for the mesh, ANSA hold the old mesh for the fixed part but do a mesh only for the part that is changed, reducing mesh time. If the answer is complex, plese tell me wich part of the user manual I have to study. Thank you

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Slicing extracted part of a volume in Python script	wilmbas	OpenFOAM Post-Processing	4	April 28, 2016 18:14
replacing of shock tube high pressure part with a boundary condition for low pressure	immortality	Main CFD Forum	0	May 2, 2013 14:30
what boundary condition is proper for simulation of shock-tube low pressure part?	immortality	OpenFOAM Running, Solving & CFD	0	May 2, 2013 14:22
Algorithme choosing for solid part analysis of conjugate heat transfer	Anna Tian	Main CFD Forum	4	January 20, 2013 17:11
Importing ccm file - Creation of geometry part from boundary	crevoise	STAR-CCM+	1	January 10, 2013 04:17

May 9, 2017, 03:08		#2
dmirel New Member demirel suleyman Join Date: Apr 2017 Location: Turkey Posts: 28 Rep Power: 9	Hello Marien, You can keep your old mesh if is on the geometry by freezeing it. Under Mesh deck in ANSA Macros->Freeze/Unfreeze. But this operation can be done only if the old mesh is not released from the surface. If this is not a helpful answer maybe you can detail your process and maybe I can help you with other advices if I understand better what you want to do, maybe some screenshots. Have fun.