Layers and 2nd order elements error

Kyriakos · November 25, 2016, 11:47

Hello,

I want to insert some layers to my mesh model (wind turbine) and i'm having some problems regarding to specific parts of my model (Hub and Blades). Whenever i try to insert layers at these particular parts i get the error message "2nd order elements not supported" even though i did not use the 2nd order option when i had them meshed.

I've also tried to remesh them but i'm still getting the same error. On other parts of my model i did not have any significant problems with layers.

I would really appreciate it if anybody could help me on this.

Thanks in advance

vangelis · November 29, 2016, 10:49

It seems that you have meshed some Macros of the model accidentally with second order mesh.
In the latest ANSA versions you should go to
UserScriptButtons(UDFs) at the top of the GUI
and select
TOOLS_GENERAL>ClearDataBase
and select
ConvertMeshToFirstOrder

In earlier ANSA versions go to
DECK>ELEMENTs>UTIL>ChangeOrder
and select 2nd to 1st for All elements
and press Apply

Then you should be able to grow layers

November 25, 2016, 11:47	Layers and 2nd order elements error	#1
Kyriakos New Member Kyriakos Charalampous Join Date: Oct 2016 Posts: 15 Rep Power: 10	Hello, I want to insert some layers to my mesh model (wind turbine) and i'm having some problems regarding to specific parts of my model (Hub and Blades). Whenever i try to insert layers at these particular parts i get the error message "2nd order elements not supported" even though i did not use the 2nd order option when i had them meshed. I've also tried to remesh them but i'm still getting the same error. On other parts of my model i did not have any significant problems with layers. I would really appreciate it if anybody could help me on this. Thanks in advance

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Keeping intermediate files	OVS	SU2	5	December 5, 2021 12:41
[Other] Meshing Layers over Aerofoil	poloding-along	OpenFOAM Meshing & Mesh Conversion	5	April 4, 2014 11:41

November 29, 2016, 10:49		#2
vangelis Senior Member Vangelis Skaperdas Join Date: Mar 2009 Location: Thessaloniki, Greece Posts: 287 Rep Power: 21	It seems that you have meshed some Macros of the model accidentally with second order mesh. In the latest ANSA versions you should go to UserScriptButtons(UDFs) at the top of the GUI and select TOOLS_GENERAL>ClearDataBase and select ConvertMeshToFirstOrder In earlier ANSA versions go to DECK>ELEMENTs>UTIL>ChangeOrder and select 2nd to 1st for All elements and press Apply Then you should be able to grow layers