New Mesh Generation and Pre-Processing Forums at CFD Online

Home > CFD News and Announcements > Message Display

CFD News and Announcements - Message Display

Post Response | Return to Index | Read Prev Msg | Read Next Msg

New Mesh Generation and Pre-Processing Forums at CFD Online

Posted By:	News Editor
Date:	Sun, 6 Jan 2013, 12:20 a.m.

CFD Online has opened a new forum section on mesh generators:

o ANSA: http://www.cfd-online.com/Forums/ansa/

o enGrid: http://www.cfd-online.com/Forums/engrid/

o GridPro: http://www.cfd-online.com/Forums/gridpro/

o Pointwise & Gridgen: http://www.cfd-online.com/Forums/pointwise/

In addition, a general forum on mesh generation and pre-processing has been opened:

o http://www.cfd-online.com/Forums/mesh-generation/

This is a test to see how it works out to create smaller dedicated forums also in the field of mesh generation and pre-processing. We tried a similar strategy in visualization and post-processing earlier in 2012, and this worked out very well.

The sub-forum list above is not complete and we will add new mesh generator sub-forums as the need arises. Please note that some mesh related forums are available also in the forum on ANSYS Meshing & Geometry and in the OpenFOAM Meshing forums here:

o ANSYS Meshing: http://www.cfd-online.com/Forums/ansys-meshing/

o OpenFOAM Meshing: http://www.cfd-online.com/Forums/openfoam-meshing/

CFD Online Discussion Forums

Post Response

Message:
Your Name:
Your Email Address:
Subject:

If you'd like to include a link to another page with your message, please provide both the URL address and the title of the page:
Optional Link URL:
Optional Link Title:
If you'd like to include an image (picture) with your message, please provide the URL address of the image file:
Optional Image URL:
If you'd like email notification of responses, please check this box:

Post Response | Return to Index | Read Prev Msg | Read Next Msg