CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > CFD News and Announcements > Message Display

CFD News and Announcements - Message DisplayCFD-Wiki

Post Response | Return to Index | Read Prev Msg | Read Next Msg

STAR-CCM+ v7.02 Released

Posted By: Lauren Gautier
Date:Fri, 9 Mar 2012, 2:36 p.m.

STAR-CCM+ v7 Changes the Game. Again!

Today, CD-adapco released STAR-CCM+ v7.02, a major new version of its multidisciplinary engineering simulation solution.

New York and London. March 08, 2012

"When developing STAR-CCM+ v7.02, our goal was threefold; to further shorten the product development schedule of our users, to increase the quality of their products, and to deliver unique insight into their product's behavior and performance," said Senior VP of Product Management, Jean-Claude Ercolanelli.

Overset Mesh

For the past 30 years, the ability of engineers to perform Computational Fluid Dynamics simulations of the interaction between multiple moving objects has been severely curtailed by the need to generate an interconnected mesh between the objects. Not only did this requirement make the creation of "moving mesh" simulations an intensive manual process, it also often rendered it impossible in the case of objects with extreme ranges of motion or with very close interaction.

The release of STAR-CCM+ v7.02 changes this forever with the introduction of a new Overset Mesh capability. Overset Mesh (sometimes called "overlapping" or "chimera" mesh), allows the user to generate an individual mesh around each moving object which then can be moved at will over a background mesh. The Overset Mesh capability is fully compatible with the full range of unstructured meshing options in STAR-CCM+. With no need to worry about interconnecting meshes or cell distortion, Overset Mesh brings genuine moving object simulation within the grasp of all engineers.

Overset Mesh can also be used for parametric studies, steady or unsteady simulations, providing an easy way to reposition or replace objects in order to study multiple design configurations.

"The term 'paradigm shift' may be overused, but the introduction of Overset Mesh in STAR-CCM+ v7.02 truly offers a new way of carrying out CAE. Overset Mesh revolutionizes the entire analysis workflow while opening a whole new range of application areas to simulation," said Jean-Claude Ercolanelli.

Overset Mesh around a missile on a Eurofighter

Overset Meshing Revolutionizes Moving Mesh Simulations

Indirect Mapped Interfaces

STAR-CCM+ v7.02 also revolutionize the simulation workflow for conjugate heat transfer (CHT) simulation (those in which temperatures are solved for both fluid and solid regions). The new Indirect Mapped Interface allows to using non-conformal meshes between solid and fluid domains. Not only does this reduce the time required to set up a CHT simulation, but it also has the potential to greatly increase the accuracy of the simulation results by allowing the user to specify the most appropriate mesh for each region without worrying about making them conformal at the interface.

Indirect Mapped Interfaces

Indirect Mapped Interface: No hassle CHT meshing.

Solution History

The Solution History is an entirely new feature of STAR-CCM+ v7.02, allowing engineers to review and explore the analysis results space by providing a complete history of a simulation, both in terms of changing results and changing design configuration. For the first time, engineers can record, store, compare, and visualize results from any analysis type. Results from multiple simulations may be recorded in a single simulation history file and easily replayed. Since the user can choose exactly which data is stored for each configuration or time-step, all this can be achieved without a large storage overhead.

The Solution History feature also provides a way of comparing multiple design configurations in a single STAR-CCM+ session.

Solution History

Solution History: Get access to your complete solution and design history.

See STAR-CCM+ v7 at the STAR Global Conference

The STAR Global Conference (March 19-21, 2012, the Netherlands) is the official launch event of STAR-CCM+ v7.02, and will include demonstrations of all the new features and a dedicated training course designed to orient users with the new software.

For more information, please visit: http://www.cd-adapco.com/engineeringsuccess

To see the full release, visit: http://www.cd-adapco.com/news/2012/03-08_starccmv7

About CD-adapco

CD-adapco www.cd-adapco.com is the world's largest independent CFD focused CAE provider. Our core products are the technology-leading simulation packages, STAR-CCM+ and STAR-CD. The scope of our activities, however, extends well beyond CFD software development to encompass a wide range of CAE engineering services in fluid dynamics, heat transfer and structural engineering. Our ongoing mission is to "inspire innovation and reduce costs through the application of engineering simulation software and services."

A privately owned company, CD-adapco has maintained 17% organic year-on-year growth over the last 5 years. CD-adapco employs over 550 talented individuals, working at 21 different offices across the globe.

###

Press Contact

Lauren Gautier, CD-adapco
lauren.gautier@cd-adapco.com
248-277-4600

STAR-CCM+ v7 Changes the Game. Again!


Post Response

Your Name:
Your Email Address:
Subject:
Message:
If you'd like to include a link to another page with your message,
please provide both the URL address and the title of the page:
Optional Link URL:
Optional Link Title:
If you'd like to include an image (picture) with your message,
please provide the URL address of the image file:
Optional Image URL:
If you'd like email notification of responses, please check this box:
 
Post Response | Return to Index | Read Prev Msg | Read Next Msg
Go to top Go to top
CFD-Wiki